Término solicitado: DE LAS HERAS, EVANGELINA/(22)
2 Registro/s encontrado/s en CAT
Tipo de Docum.: | artículo |
Título: | Wear behaviour of UHMWPE against DCPulsed plasma nitrided and duplex treated AISI 316L used in hip joint replacements |
Autor: | Perez, Ezequiel; Pazos, Leonardo; De Las Heras, Evangelina; Parodi, Belén; Corengia, Pablo; Braceras, Iñigo |
Título Ser./Col.: | Plasma Processes and Polymers, 6 |
Idioma: | eng |
Datos de Edición: | Weinheim. DE. 2009. |
Pág./Vol.: | p. S75–S80. |
Unidad técnica: | INTI-Mecánica. |
Descriptores: | Nitruración; Nitración; Plasma; Desgaste; Prótesis |
Resumen: | Wear behaviour of the artificial joint replacements plays a critical role in implant failure. The UHMWPE-AISI 316L tribological system, widely used on joint prostheses, was studied. Two surface modifications were applied to the stainless steel counterface: DC-pulsed plasma nitriding and duplex (DC-pulsed plasma nitriding þ TiN coating by cathodic-arc evaporation) treatments. An Amsler Disc Machine Type A-135 was used as an approximation to real loading conditions. Worn surfaces, weight loss curves and wear debris were analysed. The results show that the nitriding and duplex treatments improve the wear resistance of the tribological system. Different types of damages were observed on the UHMWPE worn surfaces depending on the surface treatment of the stainless steel. |
![]() | |
Trabajo de INTI |
|
URL: |
http://doi.wiley.com/10.1002/ppap.200930306 |
Tipo de Docum.: | artículo |
Título: | Mechanical properties of layers obtained by DC-pulsed plasma nitriding on a low-alloy steel (AISI 4140) |
Autor: | Dutrey, Luciano; De Las Heras, Evangelina; Svoboda, Hernán G.; Corengia, Pablo A. |
Título Ser./Col.: | Plasma Processes and Polymers |
Idioma: | eng |
Datos de Edición: | Weinheim. DE. 2009. |
Pág./Vol.: | p. S314–S320. |
Unidad técnica: | INTI-Mecánica. |
Descriptores: | Propiedades mecánicas; Nitruración; Nitración; Aceros de baja aleación; Plasma |
Resumen: | An industrial DC-pulsed plasma nitriding (DCPPN) equipment was used to obtain samples of an AISI 4140 low-alloy steelwith five different configurations: substrate, substrateþ diffusion zone, diffusion zone, substrate þ diffusion zone þ compound layer, and diffusion zone þ compound layer. The microstructures of the samples were investigated by scanning electron microscopy and X-ray diffraction. Microhardness and tensile tests were performed, and the fracture mechanisms for the different materials were finally analyzed and discussed. The DCPPN produced an increase in the elastic modulus as well as in the yield strengths, together with a pronounce ductility loss, associated to the brittle intergranular fracture surface due to the nitride precipitation in the grain boundaries. |
![]() | |
Trabajo de INTI |
|
URL: |
http://doi.wiley.com/10.1002/ppap.200932404 |
[Página de Inicio] [Nueva Búsqueda][Página Anterior]