Servicios de Información y Documentación

Biblioteca

Término solicitado: BAJO VOLTAJE/(265,65,175)

4 Registro/s encontrado/s en CAT+NORMA



Tipo de documento: NORMA
Título: COMPATIBILIDAD ELECTROMAGNETICA (CEM). PARTE 3 - LIMITES. SECCION 3 - LIMITACION DE LAS VARIACIONES DE TENSION, FLUCTUACIONES DE TENSION Y DEL PARPADEO ("FLICKER") EN REDES PUBLICAS DE SUMINISTRO DE BAJA TENSION PARA LOS EQUIPOS CON CORRIENTE DE ENTRADA
Código de Doc.: IRAM 2491-3-3:2009
Autor Inst.: Instituto Argentino de Normalización y Certificación. IRAM
Fecha: 2009
Estado: Para datos sobre la vigencia de esta norma haga clic aquí
País de Origen: Argentina
ICS: 33.100.10 Emisión
Idioma: es
Título en otro Idioma: Electromagnetic compatibility (EMC). Part 3 - Limits. Section 3 - Limitation of voltage changes, voltage fluctuation and flicker in public low-voltage supply systems,for equipment with rated current 16 A per phase and not subject to conditional connect
Edición: Segunda edición
Notas: IRAM 2491-3-3:2009 IEC 61000-3-3:1994. Reemplaza a IRAM 2491: 1999
Palabras Clave: Compatibilidad electromagnética; Corriente eléctrica; Límites; Voltaje; Variaciones; Red pública; Bajo voltaje; Equipos eléctricos
Páginas: 28p.
Ingreso de la Info.: 2016-11-25
Para ver la norma completa busque en la base Normas (solo para personal del INTI)



Tipo de documento: NORMA
Título: LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION
Código de Doc.: IEC 60364-6
Autor Inst.: International Electrotechnical Commission. IEC/CEI
Fecha: 2006
Estado:
Campo de Aplic.: Provides requirements for initial verification, by inspection and testing, of an electrical installation to determine, as far as reasonably practicable, whether the requirements of the other parts of IEC 60364 have been met and requirements for the reporting of the results of the initial verification. The initial verification takes place upon completion of a new installation or completion of additions or of alterations to existing installations. Provides requirements for periodic verification of an electrical installation to determine, as far as reasonably practicable, whether the installation and all its constituent equipment are in a satisfactory condition for use and requirements for the reporting of the results of the periodic verification
ICS: 91.140.50 Electricity supply systems
Idioma: fr;en
Título en otro Idioma: Installations électriques à basse tension - Partie 6: Vérification
Edición: 1.0 edition
Palabras Clave: Edificios; Instalaciones eléctricas; Seguridad eléctrica; Bajo voltaje; Verificación; Inspección; Resistencia eléctrica; Aislamiento; Impedancia
Páginas: 42p.
Ingreso de la Info.: 2012-02-01
Para ver la norma completa busque en la base Normas (solo para personal del INTI)



Tipo de documento: NORMA
Título: ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT = 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
Código de Doc.: IEC 61000-3-3
Autor Inst.: International Electrotechnical Commission. IEC/CEI
Fecha: 2005
Estado:
Objeto: This section of IEC 61000-3 is concerned with the limitation of voltage fluctuations and flicker impressed on the public low-voltage system. It specifies limits of voltage changes which may be produced by an equipment tested under specified conditions and gives guidance on methods of assessment. This section is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase and intended to be connected to public low-voltage distribution systems of between 220 V and 250 V at 50 Hz line to neutral. This publication supersedes IEC 60555-3. This consolidated version consists of the first edition (1994), its amendment 1 (2001) and its amendment 2 (2005). Therefore, no need to order amendments in addition to this publication
Relac. con otras Normas: IEC 60050; IEC 60050-161; IEC 60065; IEC 60107-1; IEC 60155
ICS: 33.100.10 Emission
Idioma: fr;en
Título en otro Idioma: Compatibilité électromagnetiqué (CEM) - Partie 3-3: Limites - Limitations des variations de tension, des fluctuations de tension et du papillotement dans les réseaux publics d'alimentation base tension pour les materiels ayant un assigne 16
Edición: 1.2 edition
Palabras Clave: Compatibilidad electromagnética; Corriente eléctrica; Límites; Voltaje; Variaciones; Red pública; Bajo voltaje; Equipos eléctricos
Páginas: 53p.
Ingreso de la Info.: 2010-12-02



Tipo de documento: NORMA
Título: HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS
Código de Doc.: IEC 62475
Autor Inst.: International Electrotechnical Commission. IEC/CEI
Fecha: 2010
Estado:
Objeto: IEC 62475:2010 is applicable to high-current testing and measurements on both high-voltage and low-voltage equipment. It deals with steady-state and short-time direct current (as e.g. encountered in high-power d.c. testing), steady-state and short-time alternating current (as e.g. encountered in high-power a.c. testing), and impulse-current. In general, currents above 100 A are considered in this International Standard, although currents less than this can occur in tests. This standard also covers fault detection during, for example, lightning impulse testing
Relac. con otras Normas: IEC 60051-2; IEC 60060-1; IEC 61180-1; ISO/IEC Guide 98-3
ICS: 19.080 Electrical and electronic testing
Idioma: en; fr
Título en otro Idioma: Techniques des essais à haute intensité - Définitions et exigences relatives aux courants d'essai et systèmes de mesure
Edición: 1.0 edition
Palabras Clave: Energía eléctrica; Equipos de ensayo; Mediciones eléctricas; Alto voltaje; Bajo voltaje; Corriente eléctrica; Corriente continua; Equilibrio; Cargas eléctricas
Páginas: 216p.
Ingreso de la Info.: 2010-11-30



Fin

[Página de Inicio] [Nueva Búsqueda][Página Anterior]