Término solicitado: CHAUDHARY, K. P./(22)
3 Registro/s encontrado/s en CAT
Tipo de Docum.: | artículo |
Título: | SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison |
Autor: | Viliesid, Miguel; Colín Castellanos, Carlos; Chávez, T.; Chaudhary, K. P.; Dvořáček, Frantisek; Stoup, John; Santos Barros, Wellington; Vaudagna, Leandro; Morales, Roberto; Acquarone, Alejandro; Carrasco, J.; Vega, M.; Salazar, M.; Gil, V.; Dimas, J.; Reyes, E.; Hamilton, F.; Reddock, T.; Durga, S.; Burton, T. |
Título Ser./Col.: | Metrología, 52 |
Autor Inst. Ser./Col.: | Bureau International des Poids et Mesures. BIPM. Paris. FR |
Idioma: | eng |
Datos de Edición: | s.l. IOP Publishing. 2015. |
Pág./Vol.: | 29p. |
Descriptores: | Sistema Interamericano de Metrología; Metrología; Calibración; Ensayos mecánicos; Interferometría; Patrones |
Resumen: | This supplementary comparison concerns the calibration of gauge blocks by mechanical comparison, which is a technique of paramount importance as it is at the highest level in the traceability chain of length for most countries of the American Continent. This comparison is designed to support the submitted CMC claims of these countries. The measurand is the central length of several gauge blocks as defined in ISO 3650 and the circulated gauge blocks were used for two comparisons carried out in two stages: the first stage, SIM.L-K1:2007, Calibration of gauge blocks by optical interferometry (2007–2010); the gauge blocks were also measured by mechanical comparison for those NMI also participating in SIM.L-S6:2007; the second stage, SIM.L-S6:2007, Calibration of gauge blocks by mechanical comparison (2010–2011) for the participants that measured only by mechanical comparison. In this second comparison there were 16 participants, 14 from the Americas, and 2 invited NMIs from other regions. The circulation in the second stage had 10 participants. |
Ver Documento | |
Trabajo de INTI |
|
URL: |
https://iopscience.iop.org/article/10.1088/0026-1394/52/1A/04009/ |
Tipo de Docum.: | artículo |
Título: | Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final |
Autor: | Brum Vieira, Luiz Henrique; Stone, Jack; Viliesid, Miguel; Gastaldi, Bruno R.; Przybylska, Joanna; Chaudhary, K. P. |
Título Ser./Col.: | Metrología, 52 |
Autor Inst. Ser./Col.: | Bureau International des Poids et Mesures. BIPM. Paris. FR |
Idioma: | eng |
Datos de Edición: | s.l. IOP Publishing. 2015. |
Pág./Vol.: | 42p. |
Descriptores: | Sistema Interamericano de Metrología; Metrología; Calibración; Patrones; Ángulos; Medidores; Mediciones; Instrumentos de medición |
Resumen: | In 2000, a key comparison, CCL-K3 (optical polygon and angle blocks) was started, piloted by NMISA. Based on it, in 2007, the SIM metrological region started a SIM.L-K3 key comparison piloted by INMETRO. The results of this regional comparison (RMO key comparison) contribute to the Mutual Recognition Arrangement (MRA) between the national metrology institutes of the Metre Convention. It is linked with the CCL-K3 key comparison via laboratories that participated in both the CIPM and the RMO comparisons. This common participation establishes the link between the comparisons and ensures equivalence of national metrology institutes, according to the MRA between NMIs. The SIM NMIs that took part in the CCL-K3 were NIST, NRC and CENAM. However, NRC withdrew from it. GUM from Poland (EURAMET) and NPLI from India (APMP) were invited to participate in the SIM.L-K3 key comparison. The circulation of artefacts (a 12 faces polygon and 4 angle blocks) started in 2008 and was completed in 2009. |
Ver Documento | |
Trabajo de INTI |
|
URL: |
https://iopscience.iop.org/article/10.1088/0026-1394/52/1A/04008 |
Tipo de Docum.: | informe |
Título: | SIM Regional key comparison SIM.L-K1.2007; Calibration of gauge blocks by optical interferometry; Final report, july 2012 |
Autor: | Colín, C.; Viliesid, M.; Chaudhary, K. P.; Decker, J.; Dvořáček, F.; Franca, R.; Ilieff, S.; Rodríguez, J.; Stoup, J. |
Autor Instit.: | Centro Nacional de Metrología. CENAM. Querétaro. MX; National Physical Laboratory INDIA. NPL. New Delhi. IN; National Research Council Canada. NRC. Ottawa. CA; Czech Metrology Institute. CMI. Brno. CZ; National Institute of Metrology Standardization and Industrial Quality. INMETRO. Duque de Caxias. BR; INTI-Física y Metrología. Buenos Aires. AR; Centro Español de Metrología. CEM. Madrid. ES; National Institute of Standards and Technology. NIST. Gaithersburg. US |
Idioma: | spa |
Datos de Edición: | Querétaro. MX. CENAM. 2012. |
Pág./Vol.: | 43p. |
Unidad técnica: | INTI-Física y Metrología. |
Descriptores: | Calibración; Calibres; Mediciones; Interferometría; Instrumentos de medición; Métodos de análisis; Normas; Incertidumbre |
Ver Documento | |
Trabajo de INTI |
[Página de Inicio] [Nueva Búsqueda][Página Anterior]