Tipo de documento:
|
NORMA |
Título:
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
Código de Doc.:
|
IEC 61010-1 TEST REPORT |
Autor Inst.:
|
International Electrotechnical Commission. IEC/CEI |
Fecha:
|
2011 |
Estado: |
|
Objeto:
|
IEC 61010-1:2010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a) Electrical test and measurement equipment; b) Electrical industrial process-control equipment; c) Electrical laboratory equipment. This third edition cancels and replaces the second edition published in 2001. It constitutes a technical revision. This edition includes the following significant changes from the second edition, as well as numerous other changes. The scope of the standard has been expanded to include all locations where these products may be used, so that both professional and non-professional versions of these products are within the scope. The requirements for testing and measuring circuits (in various subclauses and the entirety of Clause 16) have been removed and included in a particular standard IEC 61010-2-030. Insulation requirements (6.7) have been completely rewritten. Additional requirements for protection against mechanical HAZARDS (Clause 7) have been included. Surface temperature limits (Clause 10) have been modified to conform to the limits of EN 563. Radiation requirements (Clause 12) have been modified, and take into account a distinction between intended emission and unintended emission. Requirements for reasonably foreseeable misuse and ergonomic aspects have been added (Clause 16). A new clause (Clause 17) has been added to deal with HAZARDS and environments not covered by the standard, along with a new informative annex (Annex J) dealing with RISK assessment. A new informative annex (Annex E) addresses methods of reducing the POLLUTION DEGREE of a micro-environment. Requirements for the qualification of coatings for protection against POLLUTION have been added (Annex H). A new informative annex (Annex I) has been added to further explain how to determine the WORKING VOLTAGE of a MAINS CIRCUIT. It has the status of a group safety publication, as specified in IEC Guide 104 |
ICS:
|
19.080 Electrical and electronic testing; 71.040.10 Chemical laboratories. Laboratory equipment |
Otros Códigos:
|
ISBN 978-2-88910-987-6 |
Idioma:
|
en |
Edición:
|
3.0 edition |
Palabras Clave: |
Equipos eléctricos;
Seguridad eléctrica;
Equipos de control;
Equipos de laboratorio;
Equipos de medición;
Requisitos
|
Páginas:
|
74p. |
Ingreso de la Info.:
|
2012-06-14 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - - PART 2-030: PARTICULAR REQUIREMENTS FOR TESTING AND MEASURING CIRCUITS |
Código de Doc.:
|
IEC 61010-2-030 |
Autor Inst.:
|
International Electrotechnical Commission. IEC |
Fecha:
|
2010 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
IEC 61010-2-030:2010 specifies safety requirements for testing and measuring circuits which are connected for test or measurement purposes to devices or circuits outside the measurement equipment itself. These include measurement circuits which are part of electrical test and measurement equipment, laboratory equipment, or process control equipment. The existence of these circuits in equipment requires additional protective means between the circuit and an OPERATOR. This Part 2-030 is to be used in conjunction with the latest edition of IEC 61010-1. It was established on the basis of the third edition (2010) of IEC 61010-1. Consideration may be given to future editions of, or amendments to, IEC 61010-1. This publication is to be read in conjunction with IEC 61010-1:2010. The contents of the corrigendum of May 2011 have been included in this copy |
ICS:
|
19.080 Electrical and electronic testing; 71.040.10 Chemical laboratories. Laboratory equipment |
Idioma:
|
en |
Título en otro Idioma:
|
Regles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-030: Exigences particulières pour les circuits de test et de mesure |
Edición:
|
1.0 |
Palabras Clave: |
Equipos eléctricos;
Seguridad eléctrica;
Equipos de control;
Equipos de laboratorio;
Equipos de medición;
Requisitos;
Ensayos;
Circuitos
|
Páginas:
|
61p. |
Ingreso de la Info.:
|
2011-05-12 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USED PART 1: GENERAL REQUIREMENTS |
Código de Doc.:
|
IEC 61010-1 |
Autor Inst.:
|
International Electrotechnical Commission. IEC/CEI |
Fecha:
|
2010 |
Estado: |
|
Objeto:
|
IEC 61010-1:2010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a) Electrical test and measurement equipment; b) Electrical industrial process-control equipment; c) Electrical laboratory equipment. This third edition cancels and replaces the second edition published in 2001. It constitutes a technical revision. This edition includes the following significant changes from the second edition, as well as numerous other changes. The scope of the standard has been expanded to include all locations where these products may be used, so that both professional and non-professional versions of these products are within the scope. The requirements for testing and measuring circuits (in various subclauses and the entirety of Clause 16) have been removed and included in a particular standard IEC 61010-2-030. Insulation requirements (6.7) have been completely rewritten. Additional requirements for protection against mechanical HAZARDS (Clause 7) have been included. Surface temperature limits (Clause 10) have been modified to conform to the limits of EN 563. Radiation requirements (Clause 12) have been modified, and take into account a distinction between intended emission and unintended emission. Requirements for reasonably foreseeable misuse and ergonomic aspects have been added (Clause 16). A new clause (Clause 17) has been added to deal with HAZARDS and environments not covered by the standard, along with a new informative annex (Annex J) dealing with RISK assessment. A new informative annex (Annex E) addresses methods of reducing the POLLUTION DEGREE of a micro-environment. Requirements for the qualification of coatings for protection against POLLUTION have been added (Annex H). A new informative annex (Annex I) has been added to further explain how to determine the WORKING VOLTAGE of a MAINS CIRCUIT. It has the status of a group safety publication, as specified in IEC Guide 104 |
Relac. con otras Normas:
|
IEC 60027; IEC 60065; IEC 60068-2-14; IEC 60068-2-75; IEC 60073; IEC 60227; IEC 60245; IEC 60309; IEC 60320; IEC 60332-1-2; IEC 60332-2-2; IEC 60335-2-89; IEC 60364-4-44; IEC 60405; IEC 60417; IEC 60529; IEC 60664-3; IEC 60695-11-10; IEC 60799; IEC 60825-1; IEC 60947-1; IEC 60947-3; IEC 61010.031; IEC 61180; IEC 61180-1; IEC 61180-2; IEC 61672-1; IEC 67672-2; IEC 62262; IEC Guide 104; ISO/IEC Guide 51; ISO 306; ISO 3746; ISO 7000; ISO 9614-1 |
ICS:
|
19.080 Electrical and electronic testing; 71.040.10 Chemical laboratories. Laboratory equipment |
Otros Códigos:
|
ISBN 978-2-88910-987-6 |
Idioma:
|
fr;en |
Título en otro Idioma:
|
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire. Partie 1: Exigences générales |
Edición:
|
3.0 edition |
Notas:
|
Para la consulta de esta norma dirigirse a INTI-Electrónica e Informática |
Palabras Clave: |
Equipos eléctricos;
Seguridad eléctrica;
Equipos de control;
Equipos de laboratorio;
Equipos de medición;
Requisitos
|
Páginas:
|
322p. |
Ingreso de la Info.:
|
2010-09-03 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR THE HEATING OF MATERIALS |
Código de Doc.:
|
CEI IEC 61010-2-010 |
Autor Inst.:
|
International Electrotechnical Commission. IEC |
Fecha:
|
2003 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
This part of IEC 61010 applies only to electrically powered laboratory equipment for the heating of materials, where the heating of materials is the only function or is one of several functions of the equipment |
ICS:
|
19.080; 71.040.20 |
Idioma:
|
en |
Título en otro Idioma:
|
Regles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-010: Exigences particulieres pour appareils de laboratoire utilisés pour l'échauffement des matieres |
Edición:
|
2.0 |
Palabras Clave: |
Equipos eléctricos;
Seguridad eléctrica;
Equipos de control;
Equipos de laboratorio;
Equipos de medición;
Requisitos;
Calentamiento;
Materiales
|
Páginas:
|
42p. |
Ingreso de la Info.:
|
2009-08-05 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |