Tipo de documento:
|
NORMA |
Título:
|
TRACTORES AGRICOLAS Y FORESTALES DE RUEDAS. ESTRUCTURAS DE PROTECCION POR VUELCO. PARTE 1: METODO DE ENSAYO ESTATICO Y CONDICIONES DE ACEPTACION |
Código de Doc.:
|
IRAM 8039-1:1999 |
Autor Inst.:
|
Instituto Argentino de Normalización y Certificación. IRAM |
Fecha:
|
1999 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
País de Origen:
|
Argentina |
Objeto:
|
Especifica un método de ensayo estático y las condiciones de aceptación para las estructuras de protección (cabina o bastidor de seguridad) de tractores agrícolas y forestales de ruedas |
Campo de Aplic.:
|
Es aplicable a los tractores que poseen al menos dos ejes con ruedas neumáticas con o sin agregados de orugas y con una masa total mayor o igual que 800 kg y menor o igual que 15000 kg |
Relac. con otras Normas:
|
IRAM 8053; IRAM-IAS U 500-106 |
ICS:
|
65.060.10 |
Otros Códigos:
|
CNA 2420 |
Idioma:
|
es |
Título en otro Idioma:
|
Agricultural and forestry wheel tractor. Roll-over protective structures (ROPS). Part 1: Static test method and acceptance |
Edición:
|
primera edición |
Palabras Clave: |
Maquinaria agrícola;
Maquinaria forestal;
Ruedas;
Tractores;
Estructuras de protección;
Vuelco;
Métodos de ensayo;
Ensayos estáticos;
Riesgos;
Trabajadores rurales
|
Páginas:
|
35p. |
Ingreso de la Info.:
|
2010-03-05 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORES, MAQUINARIA AGRICOLA Y FORESTAL, EQUIPOS MOTORIZADOS PARA JARDINERIA Y ESPACIOS VERDES. SIMBOLOS DE LOS MANDOS DEL OPERADOR Y OTROS INDICADORES. PARTE 2 - SIMBOLOS PARA TRACTORES Y MAQUINARIA AGRICOLA |
Código de Doc.:
|
IRAM 8055-2:2012 |
Autor Inst.:
|
Instituto Argentino de Normalización y Certificación. IRAM |
Fecha:
|
2012 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
País de Origen:
|
Argentina |
Objeto:
|
Establece los símbolos que deben identificar los mandos indicadores, testigos y otros accionamientos utilizados en máquinas agrícolas como las definidas en la Norma IRAM 8001 |
ICS:
|
01.080.20 Símbolos gráficos para uso sobre equipos específicos; 65.060.01 Maquinaria y equipo agrícola en general |
Otros Códigos:
|
CNA 2420 |
Idioma:
|
es |
Título en otro Idioma:
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Part 2 - Symbols for agricultural tractors and machinery |
Edición:
|
primera |
Notas:
|
Reemplaza a IRAM 8055-2: 1997. Estudio de Revisión:2004, discontinuado |
Palabras Clave: |
Maquinaria agrícola;
Maquinaria forestal;
Seguridad;
Simbología;
Idenficación;
Mandos;
Tractores
|
Páginas:
|
29p. |
Ingreso de la Info.:
|
2013-12-11 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORES, MAQUINARIA AGRICOLA Y FORESTAL, EQUIPOS MOTORIZADOS PARA JARDINERIA Y ESPACIOS VERDES. SIMBOLOS DE LOS MANDOS DEL OPERADOR Y OTROS INDICADORES. PARTE 1 - SIMBOLOS GENERALES |
Código de Doc.:
|
IRAM 8055-1:2012 |
Autor Inst.:
|
Instituto Argentino de Normalización y Certificación. IRAM |
Fecha:
|
2012 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
País de Origen:
|
Argentina |
Objeto:
|
Establece los símbolos que identifican los mandos del operador, indicadores, testigos y otros accionamientos utilizados en máquinas agrícolas como las definidas en la Norma IRA0M 8001 |
Campo de Aplic.:
|
Los símbolos aplican a maquinaria para la conservación de espacios verdes, así como a otros tipos de máquinas propulsadas para operar en caminos públicos, tales como máquinas para movimientos de tierras, vehículos industriales y grúas móviles |
ICS:
|
01.080.20 Símbolos gráficos para uso sobre equipos específicos; 65.060.01 Maquinaria y equipo agrícola en general |
Otros Códigos:
|
CNA 2420 |
Idioma:
|
es |
Título en otro Idioma:
|
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Part 1 - Common symbols |
Edición:
|
Tercera edición |
Notas:
|
Reemplaza a IRAM 8055-1: 1997. Estudio de Revisión:2004, discontinuado |
Palabras Clave: |
Maquinaria agrícola;
Maquinaria forestal;
Seguridad;
Simbología;
Idenficación;
Mandos
|
Páginas:
|
38p. |
Ingreso de la Info.:
|
2013-12-11 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 13: FILE SERVER |
Código de Doc.:
|
ISO 11783-13 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2011 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-13:2011 specifies the file server (FS) for use by a tractor or self-propelled implement |
Relac. con otras Normas:
|
ISO 11783-1, ISO 11783-3, ISO 11783-5, ISO 11783-6, ISO 11783-7, ISO 11898-1, ISO 11898-2, SAE J1939, ISO/IEC 8859-1, ISO/IEC 10646, ISO/IEC 7498 |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers. Réseaux de commande et de communication de données en série. Partie 13: Serveur de fichiers |
Edición:
|
Second Edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Redes de información;
Dispositivos de control;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
46p. |
Ingreso de la Info.:
|
2013-12-03 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 12: DIAGNOSTICS SERVICES |
Código de Doc.:
|
ISO 11783-12 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2009 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information-storage and information-display units, whether mounted on, or part of, the tractor or implement. ISO 11783-12:2009 describes the diagnostic system of a serial data network |
Relac. con otras Normas:
|
ISO 11783-1, ISO 11783-2, ISO 11783-3:2007, ISO 11783-5, ISO 11783-7, ISO 14229-1, ISO 14230, ISO 15765-3, SAE J1939-73, ISO/IEC 7498, ISO 11898, ISO 15765, SAE J1939, SAE J1939-71 |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers. Réseaux de commande et de communication de données en série. Partie 12: Services de diagnostic |
Edición:
|
First Edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Redes de información;
Dispositivos de control;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
24p. |
Ingreso de la Info.:
|
2013-12-03 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 11: MOBILE DATA ELEMENT DICTIONARY |
Código de Doc.:
|
ISO 11783-11 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2011 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783-11:2011 specifies the identifiers for the data elements used in the Process Data message defined by ISO 11783-10 for a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements |
Relac. con otras Normas:
|
ISO 11783-1, ISOBUS Data Dictionary, SAE J 1939/81, ISO 7498, ISO 11519-1, ISO 11898 |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers. Réseaux de commande et de communication de données en série. Partie 11: Dictionnaire de données d'éléments mobiles |
Edición:
|
Second Edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Redes de información;
Dispositivos de control;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
3p. |
Ingreso de la Info.:
|
2013-12-03 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 10: TASK CONTROLLER AND MANAGEMENT INFORMATION SYSTEM DATA INTERCHANGE |
Código de Doc.:
|
ISO 11783-10 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2009 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-10:2009 describes the task-controller applications layer, which defines the requirements and services needed for communicating between the task controller and electronic control units. The data format to communicate with the farm-management computer, the calculations required for control and the message format sent to the control function are defined in ISO 11783-10:2009 |
Relac. con otras Normas:
|
ISO 11783-1, ISO 11783-3, ISO 11783-5, ISO 11783-6, ISO 11783-7, ISO 11783-11, ISO/IEC 10646, SAE J1939, DIN 9684-5I |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers. Réseaux de commande et de communication de données en série. Partie 10: Contrôleur de tâches et échange de données des systèmes d'information de gestion |
Edición:
|
First Edition |
Notas:
|
Para la consulta de esta norma dirigirse a Electrónica e Informática |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Redes de información;
Dispositivos de control;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
101p. |
Ingreso de la Info.:
|
2013-12-03 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 9: TRACTOR ECU |
Código de Doc.:
|
ISO 11783-9 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2012 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators, control elements and information-storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-9:2012 describes the Tractor ECU, the control function that provides the gateway between the network's tractor and implement buses, as well as performing other functions |
Relac. con otras Normas:
|
I |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Edición:
|
Second Edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Redes de información;
Dispositivos de control;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
17p. |
Ingreso de la Info.:
|
2013-12-03 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 8: POWER TRAIN MESSAGES |
Código de Doc.:
|
ISO 11783-8 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2006 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783-8:2006 specifies a serial data network for control and communications on forestry or agricultural tractors, mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators, control elements, information storage and display units whether mounted or part of the tractor, or any implements. ISO 11783-8:2005 describes the messages required by tractors and self-propelled implements |
Relac. con otras Normas:
|
ISO 11783-1, ISO 11783-7, SAE J 1939/71, SAE J 1939/81, ISO 7498, ISO 11519-1, ISO 11898 |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et materiels agricoles et forestiers. Reseaux de commande et de communication de donnees en serie. Partie 8: Messages de gestion de la transmission (boite de vitesses) |
Edición:
|
First edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Redes de información;
Dispositivos de control;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
3p. |
Ingreso de la Info.:
|
2013-12-03 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 7: IMPLEMENT MESSAGES APPLICATION LAYER |
Código de Doc.:
|
ISO 11783-7 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2009 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement |
Campo de Aplic.:
|
ISO 11783-7:2009 describes the implement messages application layer of the network, specifying the message set and defining the messages used for communication with and between tractors and connected implements |
Relac. con otras Normas:
|
ISO 639 ISO 11783-1:2007 ISO 11783-3 ISO 11783-5, ISO 11783-6, ISO 11783-9, IEC 61162-3, ISO 11783-10, ISO 11898-1:2003, SAE J1939 |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers. Réseaux de commande et de communication de données en série. Partie 7: Couche d'application de base |
Edición:
|
Second edition |
Notas:
|
Para la consulta de esta norma dirigirse a INTI-Electrónica e Informática |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Señales;
Dispositivos de control;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
144p. |
Ingreso de la Info.:
|
2013-12-03 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 5: NETWORK MANAGEMENT |
Código de Doc.:
|
ISO 11783-5 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2011 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-5:2011 describes the management of source addresses for control functions of electronic control units (ECUs), the association of addresses with the functional identification of a device and the detection and reporting of network-related errors. It also specifies procedures, and minimum requirements, for initialization and response to brief power outages of network-connected ECUs |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers - Réseaux de commande et de communication de données en série - Partie 5: Gestion reseau |
Edición:
|
Second edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
29p. |
Ingreso de la Info.:
|
2013-10-11 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 4: NETWORK LAYER |
Código de Doc.:
|
ISO 11783-4 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2011 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-4:2011 describes the network layer, which defines the requirements and services needed for communication between control functions (CFs) in different segments of the ISO 11783 network. The various types of network interconnection units are defined in ISO 11783-4:2011 |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers - Réseaux de commande et de communication de données en série - Partie 4: Couche reseau |
Edición:
|
Second edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
32p. |
Ingreso de la Info.:
|
2013-10-11 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 3: DATA LINK LAYER |
Código de Doc.:
|
ISO 11783-3 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2007 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and information-storage and -display units, whether mounted on, or part of, the tractor or implement. It is intended to provide open system interconnect (OSI) for electronic systems used by agricultural and forestry equipment. ISO 11783-3:2007 describes the data link layer and the use of CAN extended data frames by the network |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers - Réseaux de commande et de communication de données en série - Partie 3: Couche liaision de donnees |
Edición:
|
Second edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
42p. |
Ingreso de la Info.:
|
2013-10-10 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 2: PHYSICAL LAYER |
Código de Doc.:
|
ISO 11783-2 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2012 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement, and to provide an open interconnect system for electronic systems used by agricultural and forestry equipment. ISO 11783-2:2012 defines and describes the network's 250 kbit/s, twisted, non-shielded, quad-cable physical layer |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers - Réseaux de commande et de communication de données en série - Partie 2: Couche physique |
Edición:
|
Second edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
50p. |
Ingreso de la Info.:
|
2013-10-10 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 1: GENERAL STANDARD FOR MOBILE DATA COMMUNICATION |
Código de Doc.:
|
ISO 11783-1 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2007 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and information-storage and -display units, whether mounted on, or part of, the tractor or implement. It is intended to provide open system interconnect (OSI) for electronic systems used by agricultural and forestry equipment. ISO 11783-1:2007 gives a general overview of ISO 11783. Its annexes contain the identifiers for messages, addresses, control functions, implements and manufacturers, required for the implementation of a compliant network |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers - Réseaux de commande et de communication de données en série - Partie 1: Systeme normalise general pour les communications de donnees avec les equipements mobiles |
Edición:
|
First edition |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos;
Sistemas abiertos;
Interconexión de sistemas abiertos
|
Páginas:
|
94p. |
Ingreso de la Info.:
|
2013-10-10 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY -- SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK -- PART 6: VIRTUAL TERMINAL |
Código de Doc.:
|
ISO 11783-6 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2010 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-6:2010 describes a universal virtual terminal (VT) that can be used by both tractors and implements. It is applicable to both Version 3 and Version 4 VTs and Working Sets |
ICS:
|
65.060.01; 35.240.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Tracteurs et matériels agricoles et forestiers - Réseaux de commande et de communicayion de données en série - Partie 6: Terminal virtual |
Edición:
|
Second edition |
Notas:
|
Para la consulta de esta norma dirigirse a INTI-Electrónica e Informática |
Palabras Clave: |
Maquinaria agricola;
Maquinaria forestal;
Tractores;
Redes de comunicación;
Transmisión de datos
|
Páginas:
|
259p. |
Ingreso de la Info.:
|
2013-10-09 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |