Término solicitado: SISTEMAS DE ALIMENTACION ININTERRUPIDA/(265,65,175)
3 Registro/s encontrado/s en CAT+NORMA
| Tipo de documento: | NORMA |
| Título: | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| Código de Doc.: | IEC 62040-3 |
| Autor Inst.: | International Electrotechnical Commission. IEC/CEI |
| Fecha: | 1999 |
| Estado: | |
| Objeto: | Applies to electronic direct a.c. converter systems with electrical energy storage means in the d.c. link. Ensures continuity of an alternating power source. Also includes the method of specifying all power switches that form integral parts of a UPS and are associated with its output. Included are interrupters, bypass switches, isolating switches, load transfer switches and tie switches. does not refer to cnventional mains distirbution boards, rectifier input switches or d.c. switches or UPS based on rotating machines. Defines a complete uninterruptible power system in terms of its performance and not individual UPS functional units. The contents of the corrigendum of July 2003 have been included in this copy |
| Relac. con otras Normas: | IEC 60050-101; IEC 60050-131; IEC IEC 60050-161; IEC 60050-351; IEC 60050-441; IEC 60050-486; IEC 60050-551; IIEC 60050-826; IEC 60068-2-1; IEC 60068-2-27; IEC 60068-2-32 |
| ICS: | 29.200 Rectifiers. Converters. Stabilized power supply |
| Idioma: | en; fr |
| Título en otro Idioma: | Alimentations sans interruption (ASI) - Partie 3: Methode De Specification Des Performances Et Procedures DïEssai |
| Edición: | 1.0 edition |
| Palabras Clave: | Compatibilidad electromagnética; Evaluación de la conformidad; Sistemas de alimentación ininterrupida; Fuentes de energía; Energía eléctrica; Dispositivos eléctricos; Cargas eléctricas; Rectificadores; Convertidores eléctricos; Semiconductores; Requisitos de funcionamiento; Ensayos |
| Páginas: | 203p. |
| Ingreso de la Info.: | 2010-11-11 |
| Tipo de documento: | NORMA |
| Título: | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| Código de Doc.: | IEC 62040-1 |
| Autor Inst.: | International Electrotechnical Commission. IEC/CEI |
| Fecha: | 2008 |
| Estado: | |
| Objeto: | IEC 62040-1:2008 applies to uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is used with IEC 60950-1, which is referred to in this standard as "RD" (reference document). It is applicable to UPS which are movable, stationary, fixed or for building-in, for use in low-voltage distribution systems and intended to be installed in any operator accessible area or in restricted access locations as applicable. It specifies requirements to ensure safety for the operator and layman who may come into contact with the equipment and, where specifically stated, for the service person. It cancels and replaces the first edition of IEC 62040-1-1, published in 2004 and IEC 62040-1-2, published in 2004 and constitutes a technical revision. This standard merges all requirements of previous IEC 62040-1-1 and IEC 62040-1-2, with the addition of the following:- update of normative references including IEC 60950-1 as Reference Document (RD);- harmonization and alignment with current world recognized best practices;- enhancement of backfeed protection, definition of ground-fault, revision of temperature rise tables and of hydrogen concentration in battery compartments. The contents of the corrigendum of September 2008 have been included in this copy |
| Relac. con otras Normas: | IEC 60417; IEC 60529; IEC 60664; IEC 60755; IEC 60950-1; IEC 61000-2-2; IEC 61008-1; IEC 61009-1; IEC 62040-2; IEC 62040-3 |
| ICS: | 29.200 Rectifiers. Converters. Stabilized power supply |
| Idioma: | en; fr |
| Título en otro Idioma: | Alimentations sans interruption (ASI) Partie 1-1: Exigences générales et règles de sécurité pour les ASI utilisées dans des locaux accessibles aux opérateurs |
| Edición: | 1.0 edition |
| Palabras Clave: | Compatibilidad electromagnética; Sistemas de alimentación ininterrupida; Fuentes de energía; Energía eléctrica; Dispositivos eléctricos; Cargas eléctricas; Rectificadores; Convertidores eléctricos; Semiconductores; Operadores; Seguridad eléctrica; Requisitos |
| Páginas: | 123p. |
| Ingreso de la Info.: | 2010-11-11 |
| Tipo de documento: | NORMA |
| Título: | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| Código de Doc.: | IEC 62040-2 |
| Autor Inst.: | International Electrotechnical Commission. IEC/CEI |
| Fecha: | 2005 |
| Estado: | |
| Objeto: | Is intended as a product standard allowing the EMC conformity assessment of products of categories C1, C2 and C3 as defined in this part of IEC 62040, before placing them on the market.The requirements have been selected so as to ensure an adequate level of electromagnetic compatibility (EMC) for UPS at public and industrial locations |
| Relac. con otras Normas: | IEC 60050-161; IEC 61000-2-2; IEC 61000-3-2; IEC 61000-4-1; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 62040-3; CISPR 16-1-2; CISPR 22 |
| ICS: | 29.200 Rectifiers. Converters. Stabilized power supply; 17.220 Electricity. Magnetism. Electrical and magnetic measurements |
| Idioma: | en; fr |
| Título en otro Idioma: | Alimentations sans interruption (ASI) - Partie 2: Electromagnetic compatibility (EMC) requirements |
| Edición: | 2.0 edition |
| Palabras Clave: | Compatibilidad electromagnética; Evaluación de la conformidad; Sistemas de alimentación ininterrupida; Fuentes de energía; Energía eléctrica; Dispositivos eléctricos; Cargas eléctricas; Rectificadores; Convertidores eléctricos; Semiconductores; Requisitos |
| Páginas: | 77p. |
| Ingreso de la Info.: | 2010-11-11 |
Fin
[Página de Inicio] [Nueva Búsqueda][Página Anterior]