| Tipo de documento:
|
NORMA |
| Título:
|
COMPATIBILIDAD ELECTROMAGNETICA (CEM). PARTE 4-12: TECNICAS DE ENSAYO Y DE MEDIDA. ENSAYO DE INMUNIDAD A LA ONDA SINUSOIDAL AMORTIGUADA.(IEC 61000-4-12:2006) |
| Código de Doc.:
|
UNE-EN 61000-4-12 |
| Autor Inst.:
|
Asociación Española de Normalización y Certificación. AENOR |
| Fecha:
|
2007 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| País de Origen:
|
España |
| Objeto:
|
Esta parte de la Norma IEC 61000 trata de los de requisitos de inmunidad y métodos de ensayo para los equiposeléctricos y electrónicos en condiciones de funcionamiento, para las oscilaciones transitorias amortiguadas norepetitivas (ondas sinusoidales fuertemente amortiguadas) que se manifiestan en las redes de alimentación de bajatensión así como sobre las líneas de control y de señal conectadas a las redes públicas o privadas. El objeto de esta norma fundamental es establecer los requisitos de inmunidad y constituir una referencia común para laevaluación en laboratorio del funcionamiento de los equipos eléctricos y electrónicos destinados a las aplicaciones deuso residencial, comercial e industrial, así como equipos destinados a las centrales eléctricas y subestaciones, si es aplicable. Esta norma tiene por objeto definir: − tensión de ensayo y formas de onda de corriente; − rangos de los niveles de ensayo;− equipo de ensayo;− instalación de ensayo; – procedimiento de ensayo |
| ICS:
|
33.100 Compatibilidad electromagnética (CEM) |
| Idioma:
|
es |
| Título en otro Idioma:
|
Electromagnetic compatibility (EMC) -- Part 4-12: Testing and measurement techniques - Ring wave immunity test (IEC 61000-4-12:2006); Compatibilité électromagnétique (CEM) -- Partie 4-12: Techniques d'essai et de mesure - Essai d'immunité à l'onde sinusoïdale amortie (CEI 61000-4-12:2006) |
| Edición:
|
primera edición |
| Notas:
|
Esta norma es la versión oficial, en español, de la norma Europea EN 61000-4-12:2006, que a su vez adopta la norma internacional IEC 61000-4-12:2006; Anula y sustituye a la norma UNE-EN 61000-4-12:1997 y UNE-EN 61000-4-12/A1:2001 antes de 2009-11-01 |
| Palabras Clave: |
Compatibilidad electromagnética;
Ensayos;
Mediciones;
Técnicas de ensayo;
Inmunidad;
Campos magnéticos;
Ondas;
Ensayos de inmunidad;
Requisitos
|
| Páginas:
|
38p. |
| Ingreso de la Info.:
|
2013-12-17 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
COMPATIBILIDAD ELECTROMAGNETICA (CEM). PARTE 4-8: TECNICAS DE ENSAYO Y DE MEDIDA. ENSAYOS DE INMUNIDAD A LOS CAMPOS MAGNETICOS A FRECUENCIA INDUSTRIAL |
| Código de Doc.:
|
UNE-EN 61000-4-8 |
| Autor Inst.:
|
Asociación Española de Normalización y Certificación. AENOR |
| Fecha:
|
2011 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| País de Origen:
|
España |
| Objeto:
|
Establecer una referencia común con el fin de evaluar la inmunidad funcional de los equipos eléctricos y electrónicos cuando están sometidos a las perturbaciones conducidas, inducidas por los campos de radiofrecuencia |
| ICS:
|
33.100 Compatibilidad electromagnética (CEM) |
| Idioma:
|
es |
| Título en otro Idioma:
|
Electromagnetic compatibility (EMC) -- Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test; Compatibilité électromagnétique (CEM) -- Partie 4-8: Techniques d'essai et de mesure - Essai d'immunité au champ magnétique à la fréquence du réseau |
| Edición:
|
primera edición |
| Notas:
|
Esta norma es la versión oficial, en español, de la norma Europea EN 61000-4-8:2010, que a su vez adopta la norma internacional IEC 61000-4-8:2009; Anula y sustituye a la norma UNE-EN 61000-4-8:1996 y UNE-EN 61000-4-8/A1:2001 antes de 2013-02-01 |
| Palabras Clave: |
Compatibilidad electromagnética;
Ensayos;
Mediciones;
Técnicas de ensayo;
Inmunidad;
Campos magnéticos;
Frecuencia;
Ensayos de inmunidad;
Requisitos
|
| Páginas:
|
38p. |
| Ingreso de la Info.:
|
2013-12-16 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| Código de Doc.:
|
IEC 61000-4-6:2013 |
| Autor Inst.:
|
International Electrotechnical Commission. IEC |
| Fecha:
|
2013 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
EC 61000-4-6:2013 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 150 kHz up to 80 MHz. Equipment not having at least one conducting wire and/or cable (such as mains supply, signal line or earth connection) which can couple the equipment to the disturbing RF fields is excluded from the scope of this publication. The object of this standard is to establish a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to conducted disturbances induced by RF fields. The test method documented in IEC 61000-4-6:2013 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. |
| Campo de Aplic.:
|
This fourth edition cancels and replaces the third edition published in 2008 and constitutes a technical revision. It includes the following significant technical changes with respect to the previous edition: - use of the CDNs; - calibration of the clamps; - reorganization of Clause 7 on test setup and injection methods; - Annex A which is now dedicated to EM and decoupling clamps; - Annex G which now addresses the measurement uncertainty of the voltage test level; - and informative Annexes H, I and J which are new |
| ICS:
|
33.100.20 Immunity |
| Idioma:
|
enfr |
| Título en otro Idioma:
|
Compatibilité électromagnétique (CEM) - Partie 4-6: Techniques d'essai et de mesure - Immunité aux perturbations conduites, induites par les champs radioélectriques |
| Edición:
|
edition 4.0 |
| Palabras Clave: |
Compatibilidad electromagnética;
Métodos de ensayo;
Mediciones;
Técnicas de ensayo;
Inmunidad;
Campos magnéticos;
Frecuencia;
Ensayos de inmunidad;
Radiofrecuencia;
Requisitos
|
| Páginas:
|
168p. |
| Ingreso de la Info.:
|
2013-12-04 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
NON-DESTRUCTIVE TESTING OF WELDS -- ULTRASONIC TESTING -- TECHNIQUES, TESTING LEVELS, AND ASSESSMENT |
| Código de Doc.:
|
ISO 17640 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2010 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO 17640:2010 specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness greater than or equal to 8 mm which exhibit low ultrasonic attenuation (especially that due to scatter) at object temperatures from 0 ºC to 60 ºC. It is primarily intended for use on full penetration welded joints where both the welded and parent material are ferritic. Where material-dependent ultrasonic values are specified in ISO 17640:2010, they are based on steels having an ultrasonic sound velocity of (5 920 ñ 50) m/s for longitudinal waves and (3 255 ñ 30) m/s for transverse waves. ISO 17640:2010 specifies four testing levels, each corresponding to a different probability of detection of imperfections. Guidance on the selection of testing levels A, B, and C is given in Annex A. ISO 17640:2010 specifies that the requirements of testing level D, which is intended for special applications, be in accordance with general requirements. Testing level D can only be used when defined by specification. This includes tests of metals other than ferritic steel, tests on partial penetration welds, tests with automated equipment, and tests at object temperatures outside the range 0 grados C to grados 60 C.ISO 17640:2010 can be used for the assessment of indications, for acceptance purposes, by either of the following techniques: a) evaluation based primarily on length and echo amplitude of the signal indication; b) evaluation based on characterization and sizing of the indication by probe movement techniques |
| ICS:
|
25.160.40 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Contrôle non destructif des assemblages soudés - Contrôle par ultrasons - Techniques, niveaux d'essai et évaluation |
| Edición:
|
second edition |
| Palabras Clave: |
Ensayos no destructivos;
Soldadura;
Uniones soldadas;
Juntas;
Materiales metálicos;
Ensayos ultrasónicos;
Temperatura;
Técnicas de ensayo;
Métodos de ensayo;
Evaluación
|
| Páginas:
|
26p. |
| Ingreso de la Info.:
|
2012-08-16 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS |
| Código de Doc.:
|
IEC 61000-4-11 |
| Autor Inst.:
|
International Electrotechnical Commission. IEC |
| Fecha:
|
2004 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
This part of IEC 61000 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This standard applies to electrical and electronic equipment having a rated input current not exceeding 16 A per phase, for connection to 50 Hz or 60 Hz a.c. networks. It does not apply to electrical and electronic equipment for connection to 400 Hz a.c. networks. Tests for these networks will be covered by future IEC standards. The object of this standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to voltage dips, short interruptions and voltage variations. This second edition cancels and replaces the first edition published in 1994 and its amendment 1 (2000) |
| ICS:
|
33.100.20 Immunity |
| Idioma:
|
enfr |
| Título en otro Idioma:
|
Compatibilité électromagnétique (CEM) - Partie 4-8: Techniques d'essai et de mesure - Essai d'immunité aux creu de tension, courpures brèves et variations immunity test |
| Edición:
|
edition 2.0 |
| Notas:
|
This second edition constitutes a technical revision in which 1) preferred test values and durations have been added for the different environment classes; 2) the tests for the three-phase systems have been specified. It has the status of a Basic EMC Publication in accordance with IEC Guide 107. The contents of the interpretation sheet 1 of August 2010 have been included in this copy |
| Palabras Clave: |
Compatibilidad electromagnética;
Métodos de ensayo;
Mediciones;
Técnicas de ensayo;
Equipos eléctricos;
Equipos electrónicos;
Inmunidad;
Tensión;
Voltaje;
Variaciones;
Requisitos
|
| Páginas:
|
51p. |
| Ingreso de la Info.:
|
2012-02-23 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
| Código de Doc.:
|
IEC 61000-4-8 |
| Autor Inst.:
|
International Electrotechnical Commission. IEC |
| Fecha:
|
2009 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
IEC 61000-4-8:2009 relates to the immunity requirements of equipment, only under operational conditions, to magnetic disturbances at power frequencies 50 Hz and 60 Hz related to: residential and commercial locations, industrial installations and power plants, medium voltage and high voltage sub-stations |
| Campo de Aplic.:
|
The applicability of IEC 61000-4-8:2009 to equipment installed in different locations is determined by the presence of the phenomenon, as specified in Clause 4. This standard does not consider disturbances due to capacitive or inductive coupling in cables or other parts of the field installation. Other IEC standards dealing with conducted disturbances cover these aspects. The object of IEC 61000-4-8:2009 is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment for household, commercial and industrial applications when subjected to magnetic fields at power frequency (continuous and short duration field) |
| ICS:
|
33.100.20 Immunity |
| Idioma:
|
enfr |
| Título en otro Idioma:
|
Compatibilité électromagnétique (CEM) - Partie 4-8: Techniques d'essai et de mesure - Essai d'immunité au champ magnétique á la frequence du réseau |
| Edición:
|
edition 2.0 |
| Notas:
|
This second edition cancels and replaces the first edition published in 1993 and its Amendment 1 (2000). It forms a technical revision |
| Palabras Clave: |
Compatibilidad electromagnética;
Métodos de ensayo;
Mediciones;
Técnicas de ensayo;
Inmunidad;
Campos magnéticos;
Frecuencia;
Ensayos de inmunidad;
Requisitos
|
| Páginas:
|
65p. |
| Ingreso de la Info.:
|
2012-02-23 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
HIGH-VOLTAGE TEST TECHNIQUES - PART 3: DEFINITIONS AND REQUIREMENTS FOR ON-SITE TESTING |
| Código de Doc.:
|
IEC 60060-3 |
| Autor Inst.:
|
International Electrotechnical Commission. IEC/CEI |
| Fecha:
|
2006 |
| Estado: |
|
| Objeto:
|
Applicable to the following on-site test voltages and in service stresses, which are in relation to IEC 60060-1: direct voltage;alternating voltage; lightning impulse voltage of aperiodic or oscillating shape: switching impulse voltage of aperiodic or oscillating shape |
| Relac. con otras Normas:
|
IEC 60060-1; IEC 60060-2; IEC 60701-1 |
| ICS:
|
17.220.20 Measurement of electrical and magnetic quantities; 19.080 Electrical and electronic testing |
| Idioma:
|
en |
| Edición:
|
1.0 edition |
| Palabras Clave: |
Energía eléctrica;
Alto voltaje;
Técnicas de ensayo;
Mediciones;
Mediciones eléctricas;
Incertidumbre
|
| Páginas:
|
33p. |
| Ingreso de la Info.:
|
2011-02-18 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS |
| Código de Doc.:
|
IEC 60060-2 |
| Autor Inst.:
|
International Electrotechnical Commission. IEC/CEI |
| Fecha:
|
2010 |
| Estado: |
|
| Objeto:
|
IEC 60060-2:2010 is applicable to complete measuring systems, and to their components, used for the measurement of high voltages during laboratory and factory tests with direct voltage, alternating voltage and lightning and switching impulse voltages as specified in IEC 60060-1. For measurements during on-site tests see IEC 60060-3. The limits on uncertainties of measurements stated in this standard apply to test levels stated in IEC 60071-1:2006. The principles of this standard apply also to higher levels but the uncertainty may be greater. This standard also defines the terms used, methods to estimate the uncertainties of high-voltage measurements, states the requirements which the measuring systems shall meet, describes the methods for approving a measuring system and checking its components and describes the procedures by which the user shall show that a measuring system meets the requirements of this standard, including the limits set for the uncertainty of measurement. This third edition cancels and replaces the second edition, published in 1994, and constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows:The general layout and text was updated and improved to make the standard easier to use; the standard was revised to align it with IEC 60060-1; the treatment of measurement uncertainty estimation has been expanded |
| Relac. con otras Normas:
|
IEC 60052; IEC 60060-1; IEC 61083-1; IEC 61083-2; ISO7IEC Guide 98-3 |
| ICS:
|
17.220.20 Measurement of electrical and magnetic quantities; 19.080 Electrical and electronic testing |
| Idioma:
|
en; fr |
| Título en otro Idioma:
|
Techniques des issais â haute tension - Partie 2: Systême de mesure |
| Edición:
|
3.0 edition |
| Palabras Clave: |
Energía eléctrica;
Alto voltaje;
Técnicas de ensayo;
Mediciones;
Mediciones eléctricas;
Incertidumbre;
Tensión;
Corriente eléctrica;
Corriente alterna;
Tensión por impulso;
Terminología;
Requisitos
|
| Páginas:
|
154p. |
| Ingreso de la Info.:
|
2011-02-18 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| Código de Doc.:
|
IEC 60060-1 |
| Autor Inst.:
|
International Electrotechnical Commission. IEC/CEI |
| Fecha:
|
2010 |
| Estado: |
|
| Objeto:
|
IEC 60060-1:2010 applies to dielectric tests with alternating voltage; dielectric tests with direct voltage; dielectric tests with impulse voltage and dielectric tests with combinations of the above. This document is applicable to tests on equipment having its highest voltage for equipment Um above 1 kV. The third edition cancels and replaces the second edition, published in 1989, and constitutes a technical revision. The major technical changes with respect to the previous edition are as follows: artifical pollution test procedures were removed as they are now described in IEC 60507, measurement of impulse current has been transferred to a new standard on current measurement (IEC 62475), the atmospheric correction factors are now presented as formulas |
| Relac. con otras Normas:
|
IEC 60060-2; IEC 60270; IEC 60507; IEC 61083-2; IEC 62475 |
| ICS:
|
17.220.20 Measurement of electrical and magnetic quantities |
| Idioma:
|
en; fr |
| Edición:
|
3.0 edition |
| Palabras Clave: |
Energía eléctrica;
Alto voltaje;
Técnicas de ensayo;
Equipos eléctricos;
Generadores eléctricos;
Propiedades dieléctricas;
Corriente alterna;
Tensión de choque;
Tensión por impulso;
Terminología;
Requisitos
|
| Páginas:
|
149p. |
| Ingreso de la Info.:
|
2010-11-30 |
