Tipo de documento:
|
NORMA |
Título:
|
SISTEMAS DE TUBERIAS DE POLIPROPILENO. TUBOS DE POLIPROPILENO PARA UNION POR INTERFUSION, PARA EL TRANSPORTE DE AGUA POTABLE O NO, BAJO PRESION. REQUISITOS. |
Código de Doc.:
|
IRAM 13471 |
Autor Inst.:
|
Instituto Argentino de Normalización y Certificación. IRAM |
Fecha:
|
2009 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
País de Origen:
|
Argentina |
ICS:
|
23.040.20 Caños plásticos |
Idioma:
|
es |
Título en otro Idioma:
|
Polypropilene pipes systems. Polypropilene pipes for interfusion welding, for the transport of drinking water or not, under pressure. Requirements. |
Edición:
|
Segunda Edición. |
Notas:
|
Reemplaza a IRAM 13471: 1998.Incluye Modificación Nº1: 2011. |
Palabras Clave: |
Tubos;
Tuberías;
Materiales plásticos;
Polipropileno;
Uniones;
Interfusión;
Transporte;
Agua potable
|
Páginas:
|
26p. |
Ingreso de la Info.:
|
2017-10-25 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
SPECIFICATIONS FOR COMPOSTABLE PLASTICS |
Código de Doc.:
|
ISO 17088:2012 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2012 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
Specifies procedures and requirements for the identification and labelling of plastics, and products made from plastics, that are suitable for recovery through aerobic composting. The four following aspects are addressed: biodegradation; disintegration during composting; negative effects on the composting process and facility; negative effects on the quality of the resulting compost, including the presence of high levels of regulated metals and other harmful components. This specification is intended to establish the requirements for the labelling of plastic products and materials, including packaging made from plastics, as "compostable" or "compostable in municipal and industrial composting facilities" or "biodegradable during composting" (for the purposes of this International Standard, these three expressions are considered to be equivalent). The labelling will, in addition, have to conform to any international, regional, national or local regulations (e.g. European Directive 94/62/EC) |
ICS:
|
83.080.01 |
Idioma:
|
en |
Título en otro Idioma:
|
Spécifications pour les plastiques compostables |
Edición:
|
second edition |
Palabras Clave: |
Materiales plásticos;
Plásticos;
Métodos de identificación;
Requisitos;
Etiquetado;
Biodegradación;
Calidad;
Biodegradación;
Desintegración;
Compostaje aeróbico
|
Páginas:
|
8p. |
Ingreso de la Info.:
|
2012-07-06 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
PLASTICS -- POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS -- PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
Código de Doc.:
|
ISO 1873-2 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2007 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 1873-2:2007 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PP moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given. Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given. Properties and test methods which are suitable and necessary to characterize PP moulding and extrusion materials are listed |
ICS:
|
83.080.20 |
Idioma:
|
en |
Título en otro Idioma:
|
Plastiques -- Polypropylène (PP) pour moulage et extrusion -- Partie 2: Préparation des éprouvettes et détermination des propriétés |
Edición:
|
third edition |
Palabras Clave: |
Plásticos;
Materiales plásticos;
Polipropileno;
Moldeo;
Extrusión;
Métodos de ensayo;
Métodos de determinación;
Propiedades
|
Páginas:
|
7p. |
Ingreso de la Info.:
|
2012-03-27 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
PLASTICS -- POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS -- PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
Código de Doc.:
|
ISO 1872-2 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2007 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 1872-2:2007 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene (PE) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given. Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made also are given. Properties and test methods that are suitable and necessary to characterize PE moulding and extrusion materials are listed |
ICS:
|
83.080.20 |
Idioma:
|
en |
Título en otro Idioma:
|
Plastiques -- Polyéthylène (PE) pour moulage et extrusion -- Partie 2: Préparation des éprouvettes et détermination des propriétés |
Edición:
|
third edition |
Palabras Clave: |
Plásticos;
Materiales plásticos;
Polietileno;
Moldeo;
Extrusión;
Métodos de ensayo;
Métodos de determinación;
Propiedades
|
Páginas:
|
8p. |
Ingreso de la Info.:
|
2012-03-27 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
PLASTICS -- FILM AND SHEETING -- DETERMINATION OF GAS-TRANSMISSION RATE -- PART 2: EQUAL-PRESSURE METHOD |
Código de Doc.:
|
ISO 15105-2 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2003 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 15105-2:2003 specifies a method for the determination of the gas-transmission rate of any plastic material in the form of film, sheeting, laminate, co-extruded material or flexible plastic-coated material. Specific examples, currently in use, of the method are described in the annexes |
ICS:
|
83.140.10 |
Idioma:
|
en |
Título en otro Idioma:
|
Plastiques -- Film et feuille -- Détermination du coefficient de transmission d'un gaz -- Partie 2: Méthode isobarique |
Edición:
|
first edition |
Palabras Clave: |
Plásticos;
Materiales plásticos;
Películas;
Láminas;
Métodos de determinación;
Tasa de transporte de gas;
Presión diferencial
|
Páginas:
|
15p. |
Ingreso de la Info.:
|
2012-03-27 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
PLASTICS -- FILM AND SHEETING -- DETERMINATION OF GAS-TRANSMISSION RATE -- PART 1: DIFFERENTIAL-PRESSURE METHODS |
Código de Doc.:
|
ISO 15105-1 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2007 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 15105-1:2007 specifies two methods for determining the gas transmission rate of single-layer plastic film or sheet and multi-layer structures under a differential pressure. One method uses a pressure sensor, the other a gas chromatograph, to measure the amount of gas which permeates through a test specimen |
ICS:
|
83.140.10 |
Idioma:
|
en |
Título en otro Idioma:
|
Plastiques -- Film et feuille -- Détermination du coefficient de transmission d'un gaz -- Partie 1: Méthodes en pression différentielle |
Edición:
|
second edition |
Palabras Clave: |
Plásticos;
Materiales plásticos;
Películas;
Láminas;
Métodos de determinación;
Tasa de transporte de gas;
Presión diferencial;
Sensores de presión;
Cromatografía de gases;
Cromatógrafos
|
Páginas:
|
12p. |
Ingreso de la Info.:
|
2012-03-27 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
PLASTICOS. PLASTICOS BIODEGRADABLES EN O SOBRE SUELOS. RECUPERACION, ELIMINACION Y ASPECTOS MEDIOAMBIENTALES ASOCIADOS |
Código de Doc.:
|
UNE-CEN/TR 15822 |
Autor Inst.:
|
Asociación Española de Normalización y Certificación. AENOR |
Fecha:
|
2011 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
País de Origen:
|
España |
Objeto:
|
Tiene por objeto resumir el estado actual del conocimiento y experiencia en el campo de los plásticos biodegradables que se utilizan sobre el suelo o acaban en él. Aborda también las relaciones existentes entre el uso, la eliminación tras el uso, los mecanismos de degradación y el medio ambiente |
ICS:
|
13.030.99 Otras normas relativas a los residuos; 83.080.01 Plásticos en general |
Idioma:
|
es |
Título en otro Idioma:
|
Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues; Plastiques - Plastiques biodégradables dans et sur les sols - Valorisation, élimination et problèmes environnementaux associés |
Edición:
|
primera |
Notas:
|
Esta informe es la versión oficial, en español del informe técnico CEN/TR 15822:2009 |
Palabras Clave: |
Plásticos;
Materiales plásticos;
Biodegradación;
Biodegradabilidad;
Suelos;
Gestión ambiental;
Degradación;
Recuperación
|
Páginas:
|
18p. |
Ingreso de la Info.:
|
2011-03-14 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
SPECIFICATIONS FOR COMPOSTABLE PLASTICS |
Código de Doc.:
|
ISO 17088:2008 |
Autor Inst.:
|
International Organization for Standardization. ISO |
Fecha:
|
2008 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
ISO 17088:2008 specifies procedures and requirements for the identification and labelling of plastics, and products made from plastics, that are suitable for recovery through aerobic composting. The four following aspects are addressed: biodegradation; disintegration during composting; negative effects on the composting process and facility; negative effects on the quality of the resulting compost, including the presence of high levels of regulated metals and other harmful components. This specification is intended to establish the requirements for the labelling of plastic products and materials, including packaging made from plastics, as "compostable" or "compostable in municipal and industrial composting facilities" or "biodegradable during composting" (for the purposes of this International Standard, these three expressions are considered to be equivalent). The labelling will, in addition, have to conform to any international, regional, national or local regulations (e.g. European Directive 94/62/EC) |
Relac. con otras Normas:
|
ISO 472; ISO 14855-1; ISO 14855-2; ISO 16929; ISO 20200; ISO 13432; ISO ASTM D 5338; ASTM D 6400; |
ICS:
|
83.080.01 |
Idioma:
|
en |
Título en otro Idioma:
|
Spécifications pour les plastiques compostables |
Edición:
|
first edition |
Palabras Clave: |
Materiales plásticos;
Plásticos;
Métodos de identificación;
Requisitos;
Etiquetado;
Biodegradación;
Calidad;
Biodegradación;
Desintegración;
Compostaje aeróbico
|
Páginas:
|
8p. |
Ingreso de la Info.:
|
2009-11-12 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
PLASTICS WARNING DEVICES FOR UNDERGROUND CABLES AND PIPELINES WITH VISUAL CHARACTERISTICS |
Código de Doc.:
|
BS EN 12613 |
Autor Inst.:
|
British Standards. BSI |
Fecha:
|
2009 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
País de Origen:
|
United Kingdom |
Objeto:
|
Specifies the material, mechanical and functional (fitness for pupose) requeriments for warning devices with visual characteristics manufactured from plastic, intended to indicate the presence of cables and piping systems buried in ground when opening trenches and more generally during digging work |
Campo de Aplic.:
|
Is applicable to two of types of visual warning devices |
Relac. con otras Normas:
|
EN 60898-1; IEC 60898-1; EN ISO 175; ISO 175; EN ISO 846; ISO 846; EN ISO 4892-1; ISO 4892-1 |
ICS:
|
13.320; 83.140.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Dispositifs avertisseurs à caractéristiques visuelles, en matière plastique, pour câbles et canalisations enterrés; Warneinrichtungen aus Kunststoff mit visuellen Eigenschaften für erdverlegte Kabel und Rohrleitungen |
Edición:
|
first edition |
Notas:
|
Reemplaza a BS EN 12613:2001; Incorporating Corrigendum September 2009 |
Palabras Clave: |
Materiales plásticos;
Dispositivos de advertencia;
Cables eléctricos;
Detectores;
Tuberías;
Tubos;
Cañerias;
Especificaciones
|
Páginas:
|
20p. |
Ingreso de la Info.:
|
2009-10-08 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
RETI PER AGRICOLTURA. RETI ANTIGRANDINE IN FIBRA POLIETILENICA. DEFINIZIONE, CLASSIFICAZIONE E REQUISITI |
Código de Doc.:
|
UNI 10406 |
Autor Inst.:
|
Ente Nazionale Italiano di Unificazione. UNI |
Fecha:
|
1995 |
Estado: |
|
País de Origen:
|
Italia |
Objeto:
|
Stabilisce i requisiti delle reti a base di fibre di polietilene (UNI 8025) destinate alla protezione di colture orto-floro-frutticole |
Relac. con otras Normas:
|
UNI 1932; UNI 5640; UNI 8025; UNI 9401; UNI 9403; UNI 9405; UNI 9555; UNI 9556; UNI 9735; UNI 10336; UNI 10337 |
ICS:
|
59.080.99; 65.040.20 |
Idioma:
|
it |
Título en otro Idioma:
|
Nets for agricultural applications. Tets of polyethylene fibre for agricultural protection fron hail. Definition, classification and requiremlents |
Edición:
|
primera |
Palabras Clave: |
Agricultura;
Cultivos;
Proteccion;
Redes antigranizo;
Materiales plasticos;
Polietileno;
Fibras;
Requisitos;
Clasificación
|
Páginas:
|
8p. |
Ingreso de la Info.:
|
2008-07-02 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
PLACAS DE PLASTICO PERFILADOS TRANSLUCIDAS PARA CUBIERTAS DE UNA SOLA CAPA. PARTE 2: REQUISITOS ESPECIFICOS Y METODOS DE ENSAYO PARA PLACAS DE RESINA DE POLIESTER REFORZADA CON FIBRA DE VIDRIO |
Código de Doc.:
|
UNE-EN 1013-2 |
Autor Inst.:
|
Asociación Española de Normalización y Certificación. AENOR |
Fecha:
|
1999 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
Objeto:
|
Especifica los requisitos generales de los materiales y resultados de placas perfiladas, transparentes, de resinas de poliester reforzada con fibra de vidrio, destinadas a aplicaciones de cobertura de tejado de pared simple |
Relac. con otras Normas:
|
EN 59; EN 60; EN 62; EN 63; EN 1013-1 |
ICS:
|
83.140.10 |
Idioma:
|
es |
Título en otro Idioma:
|
Light transmitting profiled plastic sheeting for single skin roofing - PART 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP); Plaques profilées éclairantes en matiere plastique pour converture en simple paroi - PARTIE 2: Exigences spécifiques et méthodes pour plaques en résine de polyester reinforcée de fibres de verre (PVR) |
Edición:
|
primera |
Notas:
|
Esta norma es la versión oficial, en español de la norma europea EN 1013 de noviembre de 1998 |
Palabras Clave: |
Edificios;
Cubiertas;
Techos;
Materiales plásticos;
Transmisión de la luz;
Requisitos;
Métodos de ensayo;
Placas;
Resinas;
Poliester;
Plásticos reforzados;
Fibras de vidrio
|
Páginas:
|
13p. |
Ingreso de la Info.:
|
2008-06-09 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
MOBILIARIO DE EXTERIOR. ASIENTOS Y MESAS DE USO DOMESTICO, PUBLICO Y DE CAMPING. PARTE 4: REQUISITOS Y METODOS DE ENSAYO DE LA DURABILIDAD BAJO LA INFLUENCIA DE LAS CONDICIONES CLIMATICAS |
Código de Doc.:
|
UNE-CEN/TR 581-4 |
Autor Inst.:
|
Asociación Española de Normalización y Certificación. AENOR |
Fecha:
|
2006 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
País de Origen:
|
España |
Objeto:
|
Especifica los requisitos y los métodos de ensayos para determinar la durabilidad de la estructura y el acabado superficial de un mueble de exterior, previstos para ser usados por personas adultas, sin considerar los materiales, la contrucción/diseño o los procesos de fabricación |
Relac. con otras Normas:
|
EN 581-1; ENV 581-2; EN 581-3; EN ISO 544; EN ISO 4628-2; EN ISO 4628-3; EN ISO 4628-4; EN ISO 4628-5; EN ISO 4892-1; EN ISO 4892-2 |
ICS:
|
97.140 |
Idioma:
|
es |
Título en otro Idioma:
|
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 4: Requirements and test methods for durability under the influence of climatic conditions; Mobilier d'extérieur - Sièges et tables à usages domestique, collectif et de camping - Partie 4 : Exigences et méthodes d'essai pour la durabilité sous l'influence des conditions climatiques |
Edición:
|
primera |
Notas:
|
Es la versión oficial, en español, del informe técnico CEN/TR 581-4:2005 |
Palabras Clave: |
Muebles;
Mobiliario para exterior;
Requisitos;
Seguridad;
Asientos;
Mesas;
Métodos de ensayo;
Durabilidad;
Materiales plásticos;
Radiación ultravioleta
|
Páginas:
|
21p. |
Ingreso de la Info.:
|
2008-04-18 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Tipo de documento:
|
NORMA |
Título:
|
PLASTICS. EVALUATION OF COMPOSTABILITY. TEST SCHEME AND SPECIFICATIONS |
Código de Doc.:
|
BS EN 14995 |
Autor Inst.:
|
British Standards. BSI |
Fecha:
|
2006 |
Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
País de Origen:
|
United Kingdom |
Objeto:
|
This European Standard specifies requeriments and procedure to determine the compostabillty or anaerobic treatability of plastic materials by addressing four characteristic: 1- biodegradability, 2- disintegration during bilogical treatment, 3- effect on the biological treatment procces and effect on the quality on the resulting compost |
Relac. con otras Normas:
|
EN ISO 14851, ISO 14851:1999, EN ISO 14852, ISO 14852:1999, EN ISO 14855, ISO 14855:1999, ISO 16929, OECD Guidelines for Testing of Chemicals 208, CR 13456:1999, EN 12880, ISO 11074-1, 2001/688/EC |
ICS:
|
13.030.99 |
Idioma:
|
en |
Título en otro Idioma:
|
Matieres plastiques. Evaluation de la compostabilite. Programme d'essais et specifications |
Edición:
|
first edition |
Palabras Clave: |
Materiales plásticos;
Materiales biodegradables;
Biodegradabilidad;
Compotaje;
Compostabilidad;
Tratamientos biológicos;
Ensayos;
Especificaciones
|
Páginas:
|
20p. |
Ingreso de la Info.:
|
2008-03-11 |
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |