| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY EQUIPMENT – IMMUNITY CHARACTERISTICS – LIMITS AND METHODS OF MEASUREMENT |
| Código de Doc.:
|
CISPR 24 |
| Autor Inst.:
|
International Electrotechnical Commission. IEC |
| Fecha:
|
2015 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
CISPR 24:2010+A1:2015 applies to information technology equipment (ITE) as defined in CISPR 22. The object of this publication is to establish requirements that will provide an adequate level of intrinsic immunity so that the equipment will operate as intended in its environment. The publication defines the immunity test requirements for equipment within its scope in relation to continuous and transient conducted and radiated disturbances, including electrostatic discharges (ESD). Procedures are defined for the measurement of ITE and limits are specified which are developed for ITE within the frequency range from 0 Hz to 400 GHz. For exceptional environmental conditions, special mitigation measures may be required. Owing to testing and performance assessment considerations, some tests are specified in defined frequency bands or at selected frequencies. Equipment which fulfils the requirements at these frequencies is deemed to fulfill the requirements in the entire frequency range from 0 Hz to 400 GHz for electromagnetic phenomena. The test requirements are specified for each port considered. This second edition cancels and replaces the first edition published in 1997, and its Amendments 1(2001) and 2(2002). It is a technical revision |
| ICS:
|
33.100.20 |
| Otros Códigos:
|
ISBN 978-2-8322-2626-4 |
| Idioma:
|
enfr |
| Título en otro Idioma:
|
Appareils de traitement de l'information-Caracteristiques d'immunité - Limites et methodes de mesure |
| Edición:
|
2.1 edition |
| Palabras Clave: |
Tecnología de la información;
Equipos;
Transmisión de datos;
Telecomunicaciones;
Compatabilidad electromagnética;
Inmunidad;
Métodos de ensayo;
Mediciones
|
| Páginas:
|
98p. |
| Ingreso de la Info.:
|
2016-02-03 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- IMPLEMENTATION GUIDELINES -- PART 4: TAG DATA SECURITY |
| Código de Doc.:
|
ISO/IEC TR 24729-4 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2009 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC TR 24729-4:2009 provides guidance to systems designers to help them determine potential threats to data security of the tag and tag-to-reader communication in an RFID system, and appropriate countermeasures to provide data security. Although important, it is beyond the scope of ISO/IEC TR 24729-4:2009 to address security aspects of the reader-to-host and back-end enterprise modules. ISO/IEC TR 24729-4:2009 is not intended to specifically address consumer privacy concerns; however, since data and personal privacy depend on the use of appropriate security measures, privacy is addressed in general terms. Data access security provides a measure of personal privacy protection by mitigating the potential for unauthorized reading of data on a tag. However, not all data access security countermeasures provide the same level of protection |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Guías;
Implementación
|
| Páginas:
|
20p. |
| Ingreso de la Info.:
|
2013-12-10 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- IMPLEMENTATION GUIDELINES -- PART 3: IMPLEMENTATION AND OPERATION OF UHF RFID INTERROGATOR SYSTEMS IN LOGISTICS APPLICATIONS |
| Código de Doc.:
|
ISO/IEC TR 24729-3 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2009 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC TR 24729-3:2009 provides reference information and practical knowledge in the selection, installation and application of ISO/IEC 18000-6C RFID Readers. RFID Readers include fixed mounted (such as portal, conveyor, and wrap stations), handheld (tethered and wireless), and mobile mounted (such as those found on forklifts). ISO/IEC TR 24729-3:2009 presents guidelines to improve the performance of RFID data collection systems for more successful applications and to cover the approaches necessary to ensure that the operational requirements of the end user are met. Many of the techniques recommended are the result of practical tests in working environments. However, each application is different and thus the techniques recommended herein might not be applicable in all situations |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Guías;
Implementación
|
| Páginas:
|
36p. |
| Ingreso de la Info.:
|
2013-12-10 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- IMPLEMENTATION GUIDELINES -- PART 1: RFID-ENABLED LABELS AND PACKAGING SUPPORTING ISO/IEC 18000-6C |
| Código de Doc.:
|
ISO/IEC TR 24729-1 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2008 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC TR 24729-1:2008 provides guidance on the use of radio frequency identification (RFID) enabled labels and packaging in the supply chain. Guidance is provided for transponder selection, as well as the selection of media, adhesives, facestocks, and inks. Techniques are described to minimize electrostatic discharge and transponder damage. Methods are described to verify transponder data. Placement and attachment guidance is provided for inlays, conveyable cases and containers, palletized/unit load material, as well as non-conveyables and non-palletized materials. One type of RFID referred to within ISO/IEC TR 24729-1:2008 is the EPCglobal Class 1 Generation 2 technology. The“Class” structure originally embraced by EPCglobal has, for the most part, been overtaken by events. Consequently, this technology may be referred to as UHF Gen 2 or by its ISO designation, ISO/IEC 18000,Part 6C |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Guías
|
| Páginas:
|
31p. |
| Ingreso de la Info.:
|
2013-12-06 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 62: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE B |
| Código de Doc.:
|
ISO/IEC 18000-62 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-62:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface |
| Campo de Aplic.:
|
ISO/IEC 18000-62:2012 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator |
| Relac. con otras Normas:
|
ISO/IEC 7816-6, ISO/IEC 15961, ISO/IEC 15962, ISO/IEC 18000-1, ISO/IEC 19762, ARIB STD-T89, ARIB STD-T90, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets. Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type B |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Interfaces;
Longitud de ondas;
Banda ancha;
Compatibilidad electromagnética;
Modulación;
Bits
|
| Páginas:
|
68p. |
| Ingreso de la Info.:
|
2013-11-28 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 61: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE A |
| Código de Doc.:
|
ISO/IEC 18000-61 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-61:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards.It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface |
| Campo de Aplic.:
|
ISO/IEC 18000-61:2012 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator |
| Relac. con otras Normas:
|
ISO/IEC 7816-6, ISO/IEC 15961, ISO/IEC 15962, ISO/IEC 15963, ISO/IEC 18000-1, ISO/IEC 19762, ARIB STD-T89, ARIB STD-T90, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets. Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type A |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Interfaces;
Longitud de ondas;
Banda ancha;
Compatibilidad electromagnética;
Modulación;
Bits
|
| Páginas:
|
83p. |
| Ingreso de la Info.:
|
2013-11-28 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 6: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ GENERAL |
| Código de Doc.:
|
ISO/IEC 18000-6 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2013 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-6:2013 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface. ISO/IEC 18000-6:2013 together with ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63 and ISO/IEC 18000-64 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) or tag-only-talks-after-listening (TOTAL) RFID system. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator, or TOTAL, meaning that a tag modulates its antenna reflection coefficient with an information signal upon entering an Interrogator's field after first listening for Interrogator modulation in order to determine if the system is ITF or not |
| Campo de Aplic.:
|
Types A, B and C are ITF. Type A uses Pulse-Interval Encoding (PIE) in the forward link and an adaptive ALOHA collision-arbitration algorithm. Type B uses Manchester in the forward link and an adaptive binary-tree collision-arbitration algorithm. Type C uses PIE in the forward link and a random slotted collision-arbitration algorithm |
| Relac. con otras Normas:
|
ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63, ISO/IEC 18000-64, ISO/IEC 19762, ARIB STD-T89, ARIB STD-T90, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, ISO/IEC 18000-1, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6, ISO/IEC 29143 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets. Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Général |
| Edición:
|
Third edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Banda ancha
|
| Páginas:
|
16p. |
| Ingreso de la Info.:
|
2013-11-28 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS -- PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
| Código de Doc.:
|
ISO/IEC 18047-6 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18047-6:2012 defines test methods for determining the conformance of radio frequency identification (RFID) devices (tags and interrogators) for item management with the specifications given in ISO/IEC 18000-6, but does not apply to the testing of conformity with regulatory or similar requirements.The test methods require only that the mandatory functions, and any optional functions which are implemented, are verified. This can, in appropriate circumstances, be supplemented by further, application-specific functionality criteria that are not available in general cases.The interrogator and tag conformance parameters in ISO/IEC 18047-6:2012 are the following:type-specific conformance parameters including nominal values and tolerances; parameters that apply directly affecting system functionality and inter-operability.The following is not included in ISO/IEC 18047-6:2012:parameters that are already included in regulatory test requirements. Unless otherwise specified, the tests in ISO/IEC 18047-6:2012 are to be applied exclusively to RFID tags and interrogators defined in ISO/IEC 18000-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Méthodes d'essai des performances du dispositif d'identification par radiofréquence. Partie 6: Méthodes d'essai pour des communications d'une interface d'air a 860 MHZ et jusq'a 960 MHZ performances du tag |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Comunicaciones;
Métodos de ensayo;
Métodos de identificación;
Dispositivos;
Transmisión de datos;
Almacenamiento;
Recuperación de información;
Etiquetas
|
| Páginas:
|
78p. |
| Ingreso de la Info.:
|
2013-10-10 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS -- PART 3: TEST METHODS FOR TAG PERFORMANCE |
| Código de Doc.:
|
ISO/IEC 18046-3 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18046-3:2012 defines test methods for performance characteristics of RFID tags for item management, and specifies the general requirements and test requirements for tags which are applicable to the selection of the devices for an application. The summary of the test reports forms a unified tag datasheet. It does not apply to testing in relation to regulatory or similar requirements |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Méthodes d'essai des performances du dispositif d'identification par radiofréquence. Partie 3: Méthodes d'essai des performances du tag |
| Edición:
|
Second edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de ensayo;
Métodos de identificación;
Dispositivos;
Transmisión de datos;
Almacenamiento;
Recuperación de información;
Etiquetas
|
| Páginas:
|
53p. |
| Ingreso de la Info.:
|
2013-10-10 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS -- PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
| Código de Doc.:
|
ISO/IEC 18046-2 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2011 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
Radio frequency identification (RFID) technology has broad applicability to the automatic identification and data capture (AIDC) industry in item management. As a wireless communication technique based on radio frequency technology, the applications cover multiple levels of the industrial, commercial and retail supply chains. These can include: freight containers, returnable transport items (RTI), transport units, product packaging, and product tagging. Performance tests define test methods that deliver results that allow the comparison of different RFID systems, interrogator and tags in order to select among them for use in a particular application. The performance characteristics of devices (tags and interrogation equipment) can vary drastically due to application factors as well as the particular RFID air interface (frequency, modulation, protocol, etc.) being supported. Of key concern is the matching of the various performance characteristics to the user application. Additionally, in an open environment users of such technology demand multiple sources for these devices from technology providers. A key challenge is a method of evaluating the differences between various technology providers' products in a consistent and equitable manner. ISO/IEC 18046-2:2011 provides a framework for meeting the above noted concern and challenges. To this end, clear definitions of performance as related to user application of RFID technology in the supply chain are provided. Based on such application-based definitions, test methods are defined with attention to the test parameters required for a consistent evaluation of RFID devices |
| Campo de Aplic.:
|
Of particular significance, these tests are defined for RFID devices having one antenna. It is common practice to have products with both single and multiple antennas to define an RFID transaction zone sufficient for the application. The defined test methods used are for a single antenna, but can equivalently be extended to equipment with multiple antennas, in order to evaluate performance under conditions more closely matching those of a particular application. However care must be exercised in multiple-antenna measurement since multiple antennas can cause antenna-to-antenna interactions, physical packaging limitations, mutual coupling issues, shadowing issues, directivity issues and other impacts, even with respect to interrogators since these can be limited in size, shape, and mounting method for many RFID applications. ISO/IEC 18046-2:2011 defines test methods for performance characteristics of RFID interrogators for item management, and specifies the general requirements and test requirements for interrogators which are applicable to the selection of the devices for an application. The summary of the test reports form a unified tag datasheet. It does not apply to testing in relation to regulatory or similar requirements |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Méthodes d'essai des performances du dispositif d'identification par radiofréquence. Partie 2: Méthodes d'essai des performances de interrogateur |
| Edición:
|
first edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de ensayo;
Métodos de identificación;
Dispositivos;
Transmisión de dato;
Almacenamiento;
Recuperación de información
|
| Páginas:
|
23p. |
| Ingreso de la Info.:
|
2013-10-10 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS -- PART 1: TEST METHODS FOR SYSTEM PERFORMANCE |
| Código de Doc.:
|
ISO/IEC 18046-1 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2011 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18046-1:2011 defines test methods for performance characteristics of RFID systems for item management, and specifies the general requirements and test requirements for systems which are applicable to the selection of devices for an application. It does not apply to testing in relation to regulatory or similar requirements |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Méthodes d'essai des performances du dispositif d'identification par radiofréquence. Partie 1: Méthodes d'essai des performances du systeme |
| Edición:
|
first edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de ensayo;
Métodos de identificación
|
| Páginas:
|
66p. |
| Ingreso de la Info.:
|
2013-10-10 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 64: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE D |
| Código de Doc.:
|
ISO/IEC 18000-64 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-64:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface |
| Campo de Aplic.:
|
ISO/IEC 18000-64:2012 specifies the physical and logical requirements for a passive-backscatter, Tag Only Talks After Listening (TOTAL) RFID system. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is TOTAL, meaning that a tag modulates its antenna reflection coefficient with an information signal upon entering an Interrogator's field after first listening for Interrogator modulation in order to determine if the system is ITF or not |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets - Partie 64: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type D |
| Edición:
|
first edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Banda ancha;
Longitud de onda;
Modulación
|
| Páginas:
|
43p. |
| Ingreso de la Info.:
|
2013-10-09 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 63: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE C |
| Código de Doc.:
|
ISO/IEC 18000-63 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2013 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-63:2013 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface. ISO/IEC 18000-63:2013 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator |
| Campo de Aplic.:
|
ISO/IEC 18000-63:2013 specifies physical interactions (the signalling layer of the communication link) between Interrogators and tags, Interrogator and tag operating procedures and commands,the collision arbitration scheme used to identify a specific tag in a multiple-tag environment |
| Relac. con otras Normas:
|
ISO/IEC 7816-6, ISO/IEC 15961, ISO/IEC 15962, ISO/IEC 15963, ISO/IEC 19762, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, IEEE 1451.7, IEEE 1588:2002, ISO/IEC 3309, ISO/IEC 18000-1, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Edición:
|
first edition |
| Notas:
|
Para la consulta de esta norma dirigirse a INTI-Informática y Electrónica (Micro y Nanoelectrónica) |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Banda ancha
|
| Páginas:
|
292p. |
| Ingreso de la Info.:
|
2013-09-04 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
AMENDMENT 2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| Código de Doc.:
|
IEC 60950-1-am2 |
| Autor Inst.:
|
International Electrotechnical Commission. IEC/CEI |
| Fecha:
|
2013 |
| Estado: |
|
| Objeto:
|
Applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. Also applicable are components and subassemblies intended for incorporation in information technology equipment. It is not expected that such components and subassemblies comply with every aspect of the standard, provided that the complete information technology equipment, incorporating such components and subassemblies, does comply. The contents of the corrigendum of August 2006 have been included in this copy |
| ICS:
|
35.020 Information technology (IT) in general; 35.260 Office machines |
| Idioma:
|
en |
| Edición:
|
2.0 edition |
| Palabras Clave: |
Tecnología de la información;
Equipos informáticos;
Equipamiento;
Seguridad;
Diseño;
Requisitos
|
| Páginas:
|
49p. |
| Ingreso de la Info.:
|
2013-06-13 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Ver Documento