Término solicitado: CRANEO/(65,175,265)
5 Registro/s encontrado/s en CAT+NORMA
Tipo de Docum.: | documento de conferencia |
Título: | Prototipado rápido de fantomas craneales para la evaluación metrológica del ultrasonido transcraneal focalizado de baja frecuencia |
Autor: | Acquaticci, F.; Gwirc, S. N.; Lew, S. E. |
Reunión: | Instituto Nacional de Tecnología Industrial. INTI. Argentina, TecnoINTI edición 2022. Jornadas de Desarrollo Tecnológico e Innovación, 14, Buenos Aires. AR, 2022 |
Idioma: | spa |
Datos de Edición: | Buenos Aires. AR. INTI. 2022. |
Pág./Vol.: | Pag. varias: tbls.; fot. |
Unidad técnica: | INTI-Departamento de Seguridad de Productos Electrónicos. |
Descriptores: | Cráneo; Metrología; Ultrasonido; Equipos médicos; Tecnología médica |
Ver Documento | |
Trabajo de INTI |
Tipo de Docum.: | documento de conferencia |
Título: | Neuromodulación transcraneal por ultrasonido pulsado : nuevo enfoque para tratamiento de trastornos neurológicos |
Autor: | Acquaticci, Fabián; Gwirc, Sergio N.; Lew, Sergio E. |
Reunión: | Instituto Nacional de Tecnología Industrial. INTI. Argentina, TecnoINTI edición 2017. Jornadas Abiertas de Desarrollo, Innovación y Transferencia Tecnológica, 13, Buenos Aires. AR, 2017 |
Idioma: | spa |
Datos de Edición: | Buenos Aires. AR. INTI. 2017. |
Pág./Vol.: | 2p. |
Unidad técnica: | INTI-Electrónica e Informática. |
Descriptores: | Sistema nervioso; Cráneo; Ultrasonido |
Ver Documento | |
Trabajo de INTI |
Tipo de Docum.: | artículo |
Título: | Ultrasound axicon: systematic approach to optimize focusing resolution through human skull bone |
Autor: | Acquaticci, Fabián; Lew, Sergio E.; Gwirc, Sergio N. |
Título Ser./Col.: | Materials, 12(20) |
Autor Inst. Ser./Col.: | Multidisciplinary Digital Publishing Institute. MDPI. Basilea. Suiza |
Idioma: | eng |
Datos de Edición: | s.l. MDPI. 2019. |
Pág./Vol.: | 17p. |
Descriptores: | Ultrasonido; Cráneo |
Resumen: | The use of axicon lenses is useful in many high-resolution-focused ultrasound applications, such as mapping, detection, and have recently been extended to ultrasonic brain therapies. However, in order to achieve high spatial resolution with an axicon lens, it is necessary to adjust the separation, called stand-off (δ), between a conventional transducer and the lens attached to it. Comprehensive ultrasound simulations, using the open-source k-Wave toolbox, were performed for an axicon lens attached to a piezo-disc type transducer with a radius of 14 mm, and a frequency of about 0.5 MHz, that is within the range of optimal frequencies for transcranial transmission. The materials properties were measured, and the lens geometry was modelled. Hydrophone measurements were performed through a human skull phantom. We obtained an initial easygoing design model for the lens angle and optimal stand-off using relatively simple formulas. The skull is not an obstacle for focusing of ultrasound with optimized axicon lenses that achieve an identical resolution to spherical transducers, but with the advantage that the focusing distance is shortened. An adequate stand-off improves the lateral resolution of the acoustic beam by approximately 50%. The approach proposed provides an effective way of designing polydimethylsiloxane (PDMS)-based axicon lenses equipped transducers |
Ver Documento | |
Trabajo de INTI |
|
URL: |
https://www.mdpi.com/1996-1944/12/20/3433 |
Tipo de Docum.: | artículo |
Título: | Biomechanical analysis of bioresorbable maxillofacial plates |
Autor: | Perez, Ezequiel M. |
Título Ser./Col.: | Mecánica Computacional, 34 (17) |
Autor Inst. Ser./Col.: | Asociación Argentina de Mecánica Computacional. AAMC. Santa Fé. AR |
Idioma: | eng |
Datos de Edición: | Córdoba. AR. CIMEC. 2016. |
Pág./Vol.: | p. 1161-1167. |
Unidad técnica: | INTI-Plásticos. |
Descriptores: | Ácido láctico; Biomedicina; Biomecánica; Prótesis; Huesos; Cráneo |
Resumen: | Bioresorbable devices are actually extensively applied for bone healing. These products are exposed to several physical, chemical and mechanical requirements. For this reason, mechanical performance under different loading conditions should be exhaustively analyzed in order to warrant the long term success. In this work, mechanical behavior of polylactic acid (PLA) maxillofacial miniplate implant was investigated by mechanical tests and numerical simulations. The obtained results showed, that thread profile and screws location, respect to the broken bone plane, represent key factors for stress distributions. On the other hand, experimental tests and simulations exhibited similar displacement values. |
Ver Documento | |
Trabajo de INTI |
|
URL: |
https://cimec.org.ar/ojs/index.php/mc/article/view/5040 |
Tipo de Docum.: | serie monográfica |
Título: | Craneosteologia de la especie Austroatherina Incisa |
Autor: | Piacentino, Gabriela M.L. |
Autor Instit.: | Centro de Investigación de Biología Marina. CIBIMA. Rawson. AR |
Título Ser./Col.: | CIBIMA Contribución científica, 158 |
Idioma: | spa |
Datos de Edición: | Rawson. AR. INTI-CIBIMA. 1981. |
Pág./Vol.: | 20p., figs. |
Unidad técnica: | CIBIMA. |
Descriptores: | Huesos; Cráneo; Peces |
Trabajo de INTI |
|
Ubicación: | 1189 |
Disponibilidad: | Consulta in situ |
[Página de Inicio] [Nueva Búsqueda][Página Anterior]