| Tipo de Docum.: |
artículo |
| Título: |
Final report : key vomparison SIM.EM.RF-K5b.CL. scattering coefficients by broad-band methods. 2 GHz - 18 GHz - type N connector |
| Autor: |
Silva, H.;
Monasterios, G.
|
| Título Ser./Col.: |
Metrología, 53 |
| Autor Inst. Ser./Col.: |
Bureau International des Poids et Mesures. BIPM. Paris. FR |
| Idioma: |
eng |
| Datos de Edición: |
s.l. IOP Publishing. 2016. |
| Pág./Vol.: |
105p. |
| Descriptores: |
Sistema Interamericano de Metrología;
Dispersión;
Banda ancha;
Frecuencia;
Microondas;
Metrología;
Mediciones;
Frecuencímetros
|
| Resumen: |
The first key comparison in microwave frequencies within the SIM (Sistema Interamericano de Metrología) region has been carried out. The measurands were the S-parameters of 50 ohm coaxial devices with Type-N connectors and were measured at 2 GHz, 9 GHz and 18 GHz. SIM.EM.RF-K5b.CL was the identification assigned and it was based on a parent CCEM key comparison named CCEM.RF-K5b.CL. For this reason, the measurements standards and their nominal values were selected accordingly, i.e. two one-port devices (a matched and a mismatched load) to cover low and high reflection coefficients and two attenuators (3dB and 20 dB) to cover low and high transmission coefficients. This key comparison has met the need for ensuring traceability in high-frequency measurements across America by linking SIM's results to CCEM. Six NMIs have participated in this comparison which was piloted by the Instituto Nacional de Tecnología Industrial (Argentina). A linking method of multivariate values was proposed and implemented in order to allow the linking of 2-dimensional results. |
 Ver Documento
|
Trabajo de INTI |
URL: |
https://iopscience.iop.org/article/10.1088/0026-1394/53/1A/01010 |
| Tipo de Docum.: |
documento de conferencia |
| Título: |
Avances en el desarrollo de una plataforma UWB para detección de blancos dieléctricos |
| Autor: |
Gamez, P.;
Cervetto, M.;
Marchi, E.;
Perez, G.;
Giuffrida, C.
|
| Reunión: |
Instituto Nacional de Tecnología Industrial. INTI. Buenos Aires. AR, TecnoINTI edición 2017. Jornadas Abiertas de Desarrollo, Innovación y Transferencia Tecnológica, 13, Buenos Aires. AR, 2017 |
| Idioma: |
spa |
| Datos de Edición: |
Buenos Aires. AR. INTI. 2017. |
| Pág./Vol.: |
2p. |
| Unidad técnica: |
INTI-Micro y Nanoelectrónica.
|
| Descriptores: |
Banda ancha;
Dieléctricos
|
Ver Documento
|
Trabajo de INTI |
| Tipo de Docum.: |
documento de conferencia |
| Título: |
Internet inalámbrica de banda ancha en un canal de TV en UHF |
| Autor: |
Mollo, J. C.;
Agusti, A.;
Bazan, G.
|
| Autor Instit.: |
INTI-Electrónica e Informática. Buenos Aires. AR; Integration Communications International. ICI |
| Reunión: |
Instituto Nacional de Tecnología Industrial. INTI. Buenos Aires. AR, Jornadas de desarrollo e innovación, 4, Electrónica e Informática, innovación tecnológica, publicación autorizada por el cliente, Parque Tecnológico Miguelete. AR, 2002 |
| Idioma: |
spa |
| Datos de Edición: |
Buenos Aires. AR. INTI. 2002. |
| Pág./Vol.: |
2p. |
| Unidad técnica: |
INTI-Electrónica e Informática.
|
| Descriptores: |
Internet;
Banda ancha;
Televisión;
Televisión digital;
Transmisión de datos
|
Ver Documento
|
Trabajo de INTI |
| Disponibilidad: |
Consulta in situ |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 62: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE B |
| Código de Doc.:
|
ISO/IEC 18000-62 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-62:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface |
| Campo de Aplic.:
|
ISO/IEC 18000-62:2012 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator |
| Relac. con otras Normas:
|
ISO/IEC 7816-6, ISO/IEC 15961, ISO/IEC 15962, ISO/IEC 18000-1, ISO/IEC 19762, ARIB STD-T89, ARIB STD-T90, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets. Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type B |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Interfaces;
Longitud de ondas;
Banda ancha;
Compatibilidad electromagnética;
Modulación;
Bits
|
| Páginas:
|
68p. |
| Ingreso de la Info.:
|
2013-11-28 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 61: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE A |
| Código de Doc.:
|
ISO/IEC 18000-61 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-61:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards.It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface |
| Campo de Aplic.:
|
ISO/IEC 18000-61:2012 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator |
| Relac. con otras Normas:
|
ISO/IEC 7816-6, ISO/IEC 15961, ISO/IEC 15962, ISO/IEC 15963, ISO/IEC 18000-1, ISO/IEC 19762, ARIB STD-T89, ARIB STD-T90, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets. Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type A |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Interfaces;
Longitud de ondas;
Banda ancha;
Compatibilidad electromagnética;
Modulación;
Bits
|
| Páginas:
|
83p. |
| Ingreso de la Info.:
|
2013-11-28 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 6: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ GENERAL |
| Código de Doc.:
|
ISO/IEC 18000-6 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2013 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-6:2013 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface. ISO/IEC 18000-6:2013 together with ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63 and ISO/IEC 18000-64 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) or tag-only-talks-after-listening (TOTAL) RFID system. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator, or TOTAL, meaning that a tag modulates its antenna reflection coefficient with an information signal upon entering an Interrogator's field after first listening for Interrogator modulation in order to determine if the system is ITF or not |
| Campo de Aplic.:
|
Types A, B and C are ITF. Type A uses Pulse-Interval Encoding (PIE) in the forward link and an adaptive ALOHA collision-arbitration algorithm. Type B uses Manchester in the forward link and an adaptive binary-tree collision-arbitration algorithm. Type C uses PIE in the forward link and a random slotted collision-arbitration algorithm |
| Relac. con otras Normas:
|
ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63, ISO/IEC 18000-64, ISO/IEC 19762, ARIB STD-T89, ARIB STD-T90, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, ISO/IEC 18000-1, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6, ISO/IEC 29143 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets. Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Général |
| Edición:
|
Third edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Banda ancha
|
| Páginas:
|
16p. |
| Ingreso de la Info.:
|
2013-11-28 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 64: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE D |
| Código de Doc.:
|
ISO/IEC 18000-64 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-64:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface |
| Campo de Aplic.:
|
ISO/IEC 18000-64:2012 specifies the physical and logical requirements for a passive-backscatter, Tag Only Talks After Listening (TOTAL) RFID system. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is TOTAL, meaning that a tag modulates its antenna reflection coefficient with an information signal upon entering an Interrogator's field after first listening for Interrogator modulation in order to determine if the system is ITF or not |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets - Partie 64: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type D |
| Edición:
|
first edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Banda ancha;
Longitud de onda;
Modulación
|
| Páginas:
|
43p. |
| Ingreso de la Info.:
|
2013-10-09 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 63: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE C |
| Código de Doc.:
|
ISO/IEC 18000-63 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2013 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-63:2013 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface. ISO/IEC 18000-63:2013 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator |
| Campo de Aplic.:
|
ISO/IEC 18000-63:2013 specifies physical interactions (the signalling layer of the communication link) between Interrogators and tags, Interrogator and tag operating procedures and commands,the collision arbitration scheme used to identify a specific tag in a multiple-tag environment |
| Relac. con otras Normas:
|
ISO/IEC 7816-6, ISO/IEC 15961, ISO/IEC 15962, ISO/IEC 15963, ISO/IEC 19762, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, IEEE 1451.7, IEEE 1588:2002, ISO/IEC 3309, ISO/IEC 18000-1, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Edición:
|
first edition |
| Notas:
|
Para la consulta de esta norma dirigirse a INTI-Informática y Electrónica (Micro y Nanoelectrónica) |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Banda ancha
|
| Páginas:
|
292p. |
| Ingreso de la Info.:
|
2013-09-04 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
