| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 62: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE B |
| Código de Doc.:
|
ISO/IEC 18000-62 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-62:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface |
| Campo de Aplic.:
|
ISO/IEC 18000-62:2012 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator |
| Relac. con otras Normas:
|
ISO/IEC 7816-6, ISO/IEC 15961, ISO/IEC 15962, ISO/IEC 18000-1, ISO/IEC 19762, ARIB STD-T89, ARIB STD-T90, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets. Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type B |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Interfaces;
Longitud de ondas;
Banda ancha;
Compatibilidad electromagnética;
Modulación;
Bits
|
| Páginas:
|
68p. |
| Ingreso de la Info.:
|
2013-11-28 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
| Tipo de documento:
|
NORMA |
| Título:
|
INFORMATION TECHNOLOGY -- RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT -- PART 61: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ TYPE A |
| Código de Doc.:
|
ISO/IEC 18000-61 |
| Autor Inst.:
|
International Organization for Standardization. ISO |
| Fecha:
|
2012 |
| Estado: |
Para datos sobre la vigencia de esta norma haga clic aquí |
| Objeto:
|
ISO/IEC 18000-61:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards.It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface |
| Campo de Aplic.:
|
ISO/IEC 18000-61:2012 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator |
| Relac. con otras Normas:
|
ISO/IEC 7816-6, ISO/IEC 15961, ISO/IEC 15962, ISO/IEC 15963, ISO/IEC 18000-1, ISO/IEC 19762, ARIB STD-T89, ARIB STD-T90, ETSI EN 300 220, ETSI EN 302 208-1, ETSI EN 302 208-2, ISO/IEC 18000-2, ISO/IEC 18000-3, ISO/IEC 18000-4, ISO/IEC 18000-7, ISO/IEC 18046-3, ISO/IEC TR 18047-6 |
| ICS:
|
35.040 |
| Idioma:
|
en |
| Título en otro Idioma:
|
Technologies de l'information. Identification par radiofréquence (RFID) pour la gestion d'objets. Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type A |
| Edición:
|
First edition |
| Palabras Clave: |
Tecnología de la información;
Radiofrecuencia;
Métodos de identificación;
Distribución;
Logistica;
Transmisión de datos;
Intercambio de información;
Procesamiento de datos;
Interfaces;
Longitud de ondas;
Banda ancha;
Compatibilidad electromagnética;
Modulación;
Bits
|
| Páginas:
|
83p. |
| Ingreso de la Info.:
|
2013-11-28 |
|
|
Para ver la norma completa busque en la base Normas (solo para personal del INTI) |
Ver Documento